dovetail fixture set

john n · Mar 7, 2009

I have a dovetail fixture set(craftsman), that calls for a 1/4" dovetail bit No. 9 2553. Where can I locate one? Can't find it on sears website.

dutchman 46 · Mar 7, 2009

Welcome!!

Welcome to Router Workshop. Yes you can. I believe that they will take the set-up that uses nuts to hold them. They should be able to get them from the Sears store as well.

http://www.searspartsdirect.com/part...t/index.

Eagle has them also. Ill Will check that out a minute

400-1419 10-PIECE BRASS TEMPLATE GUIDE KIT $34.99

bobj3 · Mar 7, 2009

HI John

You may want to read the manual one time, I'm almost sure it calls for a 1/4" shaft dovetail bit with a 1/2" wide 14deg. dovetail bit...that you can find at almost any woodworkers supply store

====

dutchman 46 · Mar 8, 2009

Sorry

Thanks Bob, I missed that one. Sorry John, I read it again, and read it wrong

Dr.Zook · Mar 8, 2009

Welcome to the RouterForums John.

john n · Mar 8, 2009

It's
a bit for cutting 1/4' dovetails, and yes it has a 1/4" shank . Thanks

john n

bobj3 · Mar 8, 2009

Hi John

The set below will do the trick and you will have all the dovetail bits you will need,the ones below are a bit longer than the norm and that a real plus.

http://cgi.ebay.com/16-pc-1-4-Shank...temZ140306018256QQihZ004QQcategoryZ50386QQcmdZViewItemQQ_trksidZp1742.m153.l126

=======

dovetail fixture set

Top Contributors this Month

Recommended Communities