Register Now!

larry doss · 10-01-2004, 07:46 PM

just watched episode 1106 and 1107, I need to know what the fixture was that was used to make the drawer joints, it wasn't a box joint or a dove tail.

name brand and where I could buy one would be helpful.

thanks for your help
larry

**BobandRick** · 10-20-2004, 12:07 PM

Quote:

Originally Posted by larry doss

just watched episode 1106 and 1107, I need to know what the fixture was that was used to make the drawer joints, it wasn't a box joint or a dove tail.

name brand and where I could buy one would be helpful.

thanks for your help
larry

Larry we used the EZlink to make the drawer joints at
www.oak-park.com

Dewy · 10-22-2004, 12:22 AM

BobandRick
I went to look at the oak park site and input EZlink in the search engine and it came back with no results.
I tried again and found out it I had to separate the name into 2 parts EZ link or E-Z link.
These particular jigs are not available in UK but it was nice to see the joints that could be made.
When looking at the router bits it is very noticable how much more expensive they are here.
Many of the bits are the same or more in pounds than they are in dollars making them 1.8 times as much.
A look through the Trend site will give anyone an idea of the great price difference.
http://www.trendmachinery.co.uk/homepage/

10-01-2004, 07:46 PM	#1
larry doss Registered User Join Date: Oct 2004 Posts: 1 View larry doss's Gallery	Report This Post! looking for fixture jig just watched episode 1106 and 1107, I need to know what the fixture was that was used to make the drawer joints, it wasn't a box joint or a dove tail. name brand and where I could buy one would be helpful. thanks for your help larry
	Top - Reply with Quote

10-22-2004, 12:22 AM	#3
Dewy Registered User Forum Fanatic Join Date: Sep 2004 Posts: 120 View Dewy's Gallery	Report This Post! BobandRick I went to look at the oak park site and input EZlink in the search engine and it came back with no results. I tried again and found out it I had to separate the name into 2 parts EZ link or E-Z link. These particular jigs are not available in UK but it was nice to see the joints that could be made. When looking at the router bits it is very noticable how much more expensive they are here. Many of the bits are the same or more in pounds than they are in dollars making them 1.8 times as much. A look through the Trend site will give anyone an idea of the great price difference. http://www.trendmachinery.co.uk/homepage/ __________________ Dewy support team at Paltalk voice chat program Last edited by Dewy; 10-31-2004 at 02:34 PM.
	Top - Reply with Quote

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)