nzgeordie

Can anyone direct me to a jig for putting keys or splines into the mitred corners of a box?

__________________
Pete
I've cut it twice and it's still too short! But only at one end.

Advertising

challagan

Here are a couple:

http://www.woodsmith.com/issues/165/...ed-spline-jig/

http://www.woodworkingtips.com/etips/etip010511sn.html

http://www.ibiblio.org/twa/plans/plans/keymiterjig.pdf

For doing keyed mitered joints on boxes rather that frames. Make a similar jig only use a 2 x 4 or 2 x 6's instead.

corey

__________________
My Carving Website: The Iowa Woodcarver
http://iowacarver.tripod.com/

My Shop Website - Woodshop 51503
http://woodshop51503.tripod.com/

bobj3

Hi Geordie

Here's just one more that Gary (seawolf21) came up with
You can put in spines or a dovetails for the dovetail keys with his quick to make jig and it can all be done on the router table (quick and easy one)


http://www.routerforums.com/jigs-fix...html#post40659

Bj

__________________
PodCast videos
RWS on YouTube

http://www.routerforums.com/86898-post1.html
Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables
http://www.woodworkingonline.com/?s=dovetail
Machine Cut ▼
http://www.woodworkingonline.com/200...cut-dovetails/

http://www.woodworkingonline.com/woo...podcast-store/

http://www.woodshopdemos.com/menu2.htm

Bob J.

nzgeordie

Thanks Corey / Bj. I don't have a table saw yet so I need a router based solution. I've printed off the keyed mitre jig from one of Corey's links (Project 14658EZ) and should be able to adapt it for router table use. Thanks again.

__________________
Pete
I've cut it twice and it's still too short! But only at one end.