Finger joint jig - one anoyone can make

**bobj3** · 09-09-2008, 05:00 PM

You're Welcome nordhagen

Hope it helps

By the way here's a blow up of the BMP file so you can see it..

===========

Quote:

Originally Posted by nordhagen

Could you please point me in the direction of the full PDF? The BMP was too small to be of any use...

Also Bob; thanks for the link to the woodworking channel! I saw a couple of the videos and they look very interesting. I'll be checking all of them out

nordhagen · 09-09-2008, 05:02 PM

Thanks for the blow up, but it's still not verry readable...

**bobj3** · 09-09-2008, 05:05 PM

Hi

Sorry

It's hard to blow them up,,, it's easy to make them smaller but bigger can do just so much...

I will try it one more time, but bmp files are junk..just click on it 2 times that should blow it just a bit more, look for the + on the snapshot.

=====

Quote:

Originally Posted by nordhagen

Thanks for the blow up, but it's still not verry readable...

nordhagen · 09-09-2008, 05:09 PM

But where did it come from?

**bobj3** · 09-09-2008, 05:16 PM

Hi nordhagen

From this post and the PDF file...
http://www.routerforums.com/80638-post19.html

Just a note Adobe Reader it's a great tool if you know how to use it..
see test picture below

Maybe ask him to post the PDF file ,, the new max size for PDF files is 4.0 GB.
It will take a bit of time to upload and download a 22mb file but if you have a fast hook up it should go quick.

========

Quote:

Originally Posted by nordhagen

But where did it come from?

nordhagen · 09-10-2008, 01:25 AM

Quote:

Originally Posted by bobj3

Hi nordhagen

From this post and the PDF file...
http://www.routerforums.com/80638-post19.html

Just a note Adobe Reader it's a great tool if you know how to use it..
see test picture below

Maybe ask him to post the PDF file ,, the new max size for PDF files is 4.0 GB.
It will take a bit of time to upload and download a 22mb file but if you have a fast hook up it should go quick.

========

I'm a graphic designer, so I know quite a bit about PDF files, but I still don't know what file you are refrerring to and who has it. Downloading 22mb isn't a problem, I'm on a 10 Mb DSL line.

I don't wanna sound nagging here, but there seems to be one specific PDF file you are talking about that I should know of, and it's confusing me..

opelblues · 09-10-2008, 02:10 AM

hi all been reading the posts, Im in Australia and we still wind the crank handle when it comes to the bigpond service adsl. i hope this works im going to post the full pdf, i carnt put photos up of the first one i built, for its in gladstone around 600 km from were iam, the finger joint jig can be adjusted to suite the size of router bit or saw blades, have fun with timber i

Email -gla21552@bigpond.net.au

**bobj3** · 09-10-2008, 08:19 AM

Hi nordhagen

The BMP that OpelBlues posted came from the PDF file, I don't know the name of the file but it sounds like he has the 22mb PDF on his computer.

I would suggest you drop him a email Plus a PM and ask him to post it on the forum.
Or ask him for the name of the file, it maybe on the NET because it is a PDF.

Then you would have all the pictures and text ...that he has..

NOTE*** take a hard look at the picture, see the holes on the left side of the page, looks like he may have a hard copy or it or it came from a book/mag. hard to say for sure...
Because the file is 22mb I would say he made the PDF file by coping the pages in to the PDF file..
Most PDF files are not that big...unless they are home made..

Picture,, looks like a WoodSmith mag. format..

Add On Post below ▼

JUST ONE MORE Note, doing just of bit of digging

I think this is the one he posted..

http://www.woodsmith.com/plans/box-joint-jig/
http://www.woodsmith.com/plans/box-joint-jig/exploded/
http://plansnow.com/boxjoint.html

Hope this helps

======

===

Quote:

Originally Posted by nordhagen

I'm a graphic designer, so I know quite a bit about PDF files, but I still don't know what file you are refrerring to and who has it. Downloading 22mb isn't a problem, I'm on a 10 Mb DSL line.

I don't wanna sound nagging here, but there seems to be one specific PDF file you are talking about that I should know of, and it's confusing me..

**bobj3** · 09-10-2008, 09:53 AM

nordhagen · 09-10-2008, 12:39 PM

Thank you so much! I've bought a couple of plans from that site now. Looking forward to trying them out. Wow, you really went through some trouble to help me, so thank you again

Now I understand why I couldn't just get the file, since it cost money.

LinkBacks (?) LinkBack to this Thread: http://www.routerforums.com/jigs-fixtures/9457-finger-joint-jig-one-anoyone-can-make.html
Posted By	For	Type	Date
Woodworking \| The Nordhagen	This thread	Refback	10-14-2009 03:39 AM
Jig \| The Nordhagen	This thread	Refback	05-29-2009 03:47 AM
Finger joint router jig - one anyone can make \| The Nordhagen	This thread	Refback	04-02-2009 10:52 AM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oak park finger joint ? for Bob and Rick	Glenmore	Jigs and Fixtures	1	07-30-2008 06:55 PM
Leight finger joint template	S Bolton	Jigs and Fixtures	0	07-29-2007 11:58 AM
My first finger joint box	simplenik	Table-mounted Routing	6	06-24-2007 08:52 AM
My first ever Finger (box) joint	simplenik	Table-mounted Routing	19	06-23-2007 09:53 AM
Chipout when using finger joint jig	jihhwood	Jigs and Fixtures	3	01-03-2007 07:33 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Username		Remember Me?
Password