Register Now!

jonnyboy63 · 03-20-2006, 12:13 PM

I'm no computer whiz but I would think that you could put a click box in all threads. When someone reads it and finds it usefull they could click the box. It would then pop up in an administrators site where counts could be tallied. If the hint/tip was found useful by a pre-determined number of registered users then it would be addopted for placement in a 'library' of sorts.

Hope I made sense

CASparky · 11-30-2006, 09:04 PM

Quote:

Originally Posted by Pop_pop1

I would like to suggest a subforum created to permantly store useful information like the template guide bushing charts and router speed/bit diameter chart that members could download their own copy from or print a hard copy from. This would eliminate the need to "hunt" the thread where the info or chart was posted previously. I think this would be especially useful for the newbe.

Not sure if this is where a reply or related question goes or not? And since previous replies and questions in other threads went unanswered (possibly due to the Thread age?), I would be surprised if this gleaned a response.

Where would one find the 'Template Guide Bushing Charts'? Guide bushings give me a fit everytime I use them and it sounds as if a Guide Bushing Chart may be of of value when using same. Thanks
Lou

Pop_pop1 · 11-30-2006, 10:47 PM

Quote:

Originally Posted by Caspary

Not sure if this is where a reply or related question goes or not? And since previous replies and questions in other threads went unanswered (possibly due to the Thread age?), I would be surprised if this gleaned a response.

Where would one find the 'Template Guide Bushing Charts'? Guide bushings give me a fit every time I use them and it sounds as if a Guide Bushing Chart may be of of value when using same. Thanks
Lou

Lou, We had this same subject come up about a year or so ago. I thought Mark was going to make the thread that has the charts in it as a sticky under General Routing or some other topic. We had also kicked around the idea of creating another category to contain all of the recurring items in members keep asking for, the guide & bit charts were specifically sighted as an example. I don't know if that ever happened. I have been absent from the forum for some time due to illness, so I think your question should be addressed to Mark or one of the other Moderators.
If you can't find the charts here, I will be glad to make you a copy of mine and email them to you. Send me a PM with your email address.

Chuck

**bobj3** · 11-30-2006, 11:02 PM

Just a butt in post, hope this helps a bit.

http://www.routerforums.com/1812-post9.html

Bj

Pop_pop1 · 11-30-2006, 11:34 PM

Thanks BJ. This is some good info and I am sure Lou & others will take advantage of it.

**Mike** · 12-01-2006, 02:15 AM

There are always lots of projects going on in the background. Part of the problem is doing the research into which material would be most important to post, then having the time to dedicate for organizing it. I have a couple ideas that need to be implemented. At present the other moderators are not available due to illness or personal matters. I am doing the best I can to be sure questions get answers and other housekeeping duties are attended to.

template tom · 12-02-2006, 05:21 AM

Quote:

Originally Posted by bobj3

Just a butt in post, hope this helps a bit.

Bj

Thanks Bob
For posting my Introduction to the use of template Guides. Can I just say that is what it says [U]"An introduction to the use of template Guides'[/u]
Most router users do not use the guides, 90% is my estimate and they are missing out on a great number of projects with the router. I also advocate that it is a safer method of using the router, so safe I have blind people using the router to produce elliptical and heart shaped trinket boxes wine racks Mantle clocks etc etc etc The list just goes on and on
Have a look at my Blogs
Tom
http://www.woodshopphotos.com/main.p...542&g2_page=1&

http://tomodonnell.bigblog.com.au/blog.do

http://routermagic.blogspot.com/

Give me a call
Tom

Joe Lyddon · 12-02-2006, 03:16 PM

Quote:

Originally Posted by Mark

Yes, it would be a lot of work, but, I agree with you it is an excellent suggestion.

Mark,
Isn't this suggestion handled with our present "sticky" option?

CASparky · 12-16-2006, 05:17 PM

Quote:

Originally Posted by Pop_pop1

Thanks BJ. This is some good info and I am sure Lou & others will take advantage of it.

Thanks to Bobj2 for the Table and example attachments. I had also sent pop_pop1 an email to his routerforums.com mail box.
Thanks also to Template Tom as his links help fully understand the table by adding descriptors to the letters in the table.
(Then again if one would look at the images first, it would also become clear.)
The table is a slighty different way of probably describing the same thing I thought should 'be out there'.
(I was looking for a 'difference or relation chart' between bits and guides.)
I will make it work!! Thanks!, Merry Christmas, Lou

**bobj3** · 12-16-2006, 05:42 PM

You're Welcome Lou

I found them on the forum and I also have them on my PC and I printed them out for the shop to hang right next to the router table.

Merry Christmas
Bj

03-20-2006, 12:13 PM	#11
jonnyboy63 Registered User Member Join Date: Mar 2006 Posts: 23 View jonnyboy63's Gallery	Report This Post! I'm no computer whiz but I would think that you could put a click box in all threads. When someone reads it and finds it usefull they could click the box. It would then pop up in an administrators site where counts could be tallied. If the hint/tip was found useful by a pre-determined number of *registered users* then it would be addopted for placement in a 'library' of sorts. Hope I made sense __________________ Jonathan C. O'Connor
	Top - Reply with Quote

11-30-2006, 11:34 PM	#15
Pop_pop1 Registered User Forum Fanatic Join Date: Sep 2004 Posts: 143 View Pop_pop1's Gallery	Report This Post! Thanks BJ. This is some good info and I am sure Lou & others will take advantage of it. __________________ PopPop If it's worth building, It's worth building well. poppop@routerforums.com
	Top - Reply with Quote

12-01-2006, 02:15 AM	#16
Mike Senior Moderator Supreme Forum King Join Date: Nov 2004 Location: Detroit, Michigan USA Posts: 3,372 View Mike's Gallery	Report This Post! There are always lots of projects going on in the background. Part of the problem is doing the research into which material would be most important to post, then having the time to dedicate for organizing it. I have a couple ideas that need to be implemented. At present the other moderators are not available due to illness or personal matters. I am doing the best I can to be sure questions get answers and other housekeeping duties are attended to. __________________ Mike Please edit your profile with a name and location so we can better assist you.
	Top - Reply with Quote

12-16-2006, 05:42 PM	#20
bobj3 Forum Contributer Supreme Forum King Join Date: Jan 2006 Location: Littleton,Colorado U.S.A. Posts: 8,274 View bobj3's Gallery	Report This Post! You're Welcome Lou I found them on the forum and I also have them on my PC and I printed them out for the shop to hang right next to the router table. Merry Christmas Bj __________________ PodCast videos RWS on YouTube http://www.routerforums.com/86898-post1.html Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables http://www.woodworkingonline.com/?s=dovetail Machine Cut ▼ http://www.woodworkingonline.com/200...cut-dovetails/ http://www.woodworkingonline.com/woo...podcast-store/ http://www.woodshopdemos.com/menu2.htm Bob J.
	Top - Reply with Quote

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Router Workshop not on the air in my area	tommyboy	Lobby	3	10-18-2007 09:51 PM
Rockler Woodworking Store	-Sam-	Lobby	14	06-12-2007 10:47 PM
New Harbor Freight store in Michigan	AxlMyk	Lobby	3	09-14-2006 08:01 PM
PC 690 Info	Peter_Lowes	General Routing	2	10-19-2004 08:46 PM