lyoncub

I wish to glue laminate onto a solid piece of pine and finish the edge with a ogee bit. Will the router bit cut the laminate to shape or do I have to router the edge of pine first and then very carefully glue the laminate on it and file the edges?

Advertising

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Router Forums

bobj3

Hi lyoncub

The ogee bit will do the job,, but you will need to lay the laminate a bit shy of the edges,,,that's to say keep it back from the edge, laminate likes to snap off the edges if you have to much hanging over the cut...

take 2 passes to get the job done a bit of masking tape will help hold the laminate in place and give you a nice clean cut..




=========

__________________
Router Tables plans FREE, plus more
http://www.absolutelyfreeplans.com/W...p_projects.htm

Router Tip Archive
http://www.routerworkshop.com/router_tip_glossary.html

Calculators
http://www.routerforums.com/dynamic-calculators/

Dr.Zook

Welcome to the Router Forums lyoncub.

__________________
Dave
the "Doctor"

In woodworking there is no scrap, only firewood.