bobj3

Thanks Trap for the link,,,it took a bit to get to it but it's a good one on the Horz.table

http://lumberjocks.com/jocks/eaglela...king/blog/1292
http://www.eaglelakewoodworking.com/index.htm?mlcs.htm
Video Below ▼
http://www.eaglelakewoodworking.com/...google_med.htm
=========

__________________
PodCast videos
RWS on YouTube

http://www.routerforums.com/86898-post1.html
Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables
http://www.woodworkingonline.com/?s=dovetail
Machine Cut ▼
http://www.woodworkingonline.com/200...cut-dovetails/

http://www.woodworkingonline.com/woo...podcast-store/

http://www.woodshopdemos.com/menu2.htm

Bob J.

Advertising

trap

bobj3.
I worked on that link for some time and could not get. Thanks for the direct link.
Bud

__________________
The Geezer

bobj3

Hi Trap

You'er Welcome ,,,they can be tricky sometimes

Here's a trick I use from time to time..

Right Click on the item you want the URL for and Select, Copy Link,you should see 2 or 3 types...then just paste that into NotePad and use it in your post.

===================

__________________
PodCast videos
RWS on YouTube

http://www.routerforums.com/86898-post1.html
Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables
http://www.woodworkingonline.com/?s=dovetail
Machine Cut ▼
http://www.woodworkingonline.com/200...cut-dovetails/

http://www.woodworkingonline.com/woo...podcast-store/

http://www.woodshopdemos.com/menu2.htm

Bob J.

Lee Brubaker

From the responses it would seem to me that some are confusing a horizontal router table by calling it a vertical table.The prevailing terminalogy that Iam familiar with is as BobJ used ie: standard table versus horizontal table. One of the advantages re a horizontal table is that it enables the use of a smaller handheld router for panel raising because a vertical panel raising bit's dia. of 1". For us nervous nellies those big panel raising bits used in a standard table kinda takes the fun outta routing. I have both types of tables & I find the horizontal table handier to use for some operations than the standard table. For example, edge jointing, mortising, tenons, & if you really want to get carried away you can make raised panels utilizing plywood if you are careful matching grain when gluing solid wood to the panel where the machining is going to take place. Good for sliding & blind dovetails as well.

Lee