Help
Require Assistance? Read the Beginners Guide to RouterForums.com
RouterForums.com - Router and Woodworking Discussion Community

Go Back   Router Forums > General Woodworking > Tools and Woodworking
IconIt appears you arenít a registered member of the Router Forums community. Why not spend less than a minute and register for the oldest and largest router and woodworking community on the web! Join in over 29,500 discussions with over 65,000 woodworkers. If youíre an experienced or beginner woodworker, your questions and knowledge is always warmly welcomed by our community. Register now for your FREE account!

Radial router

This is a discussion on Radial router within the Tools and Woodworking forums, part of the General Woodworking category; I am ryma, i would like to know if anyone uses a radial router manufactured ...


  • Replies: 3, Views: 853

New Reply
 
LinkBack Thread Tools Display Modes
Old 08-15-2009, 07:39 AM   #1 (permalink)
Registered User
 
Join Date: Aug 2009
Country: United States
First Name: LARRY
Posts: 2
ryma is on a distinguished road

Default Radial router
Report Post Report This Post!

I am ryma,

i would like to know if anyone uses a radial router manufactured by ten fingers corp. Any info would be appreciated.

Thank you
ryma

ryma is offline  
Sponsored Advertisement - Register now to remove this advertisement.
** Please be sure to read our Disclaimer at the bottom of the page. **
These advertisements are only displayed to guests, register now for your FREE account on the worlds largest router and woodworking community!
Old 08-15-2009, 09:36 AM   #2 (permalink)
Registered User
 
dutchman 46's Avatar
 
Join Date: May 2007
Country: United States
First Name: Howard
Posts: 2,799
dutchman 46 is on a distinguished road

Default
Report Post Report This Post!

Welcome, Sorry, I am not to well versed on that. But Please fill our your profile and add your location. Without that information, we will not know anything about you. Thank you, and please enjoy the forum. Thank you!
__________________
John 3:16

Please fill out your profile, It helps us to know you better
dutchman 46 is offline  
Old 08-15-2009, 07:13 PM   #3 (permalink)
Registered User
 
allthunbs's Avatar
 
Join Date: Jun 2008
Country: Canada
First Name: Ron
Posts: 2,873
allthunbs will become famous soon enough

Default
Report Post Report This Post!

Quote:
Originally Posted by ryma View Post
I am ryma,

i would like to know if anyone uses a radial router manufactured by ten fingers corp. Any info would be appreciated.

Thank you
ryma
I'm not familiar with the Ten Finger's product but the philosophy is similar to a gantry router but the operation is just like a template and guide setup. From what I can understand reading between the lines, I would look at "template tom's" essays throughout this and many other woodworking sites. I would seek out the Auzzie wood working site since he contributes frequently there. You might also read Harrysin 's essays throughout this forum.

Allthunbs
allthunbs is offline  
Old 08-15-2009, 07:41 PM   #4 (permalink)
Forum Contributor
 
Join Date: Jan 2006
Country: United States
First Name: Bj
Posts: 23,786
bobj3 has a brilliant futurebobj3 has a brilliant futurebobj3 has a brilliant futurebobj3 has a brilliant future

Default
Report Post Report This Post!

Radial Arm Mill Router
Welcome to Ten Fingers Corp - Home of the Radial Arm Mill Router

I just recall Mike had one for sale I think or he knew someone that did (2007)

http://www.routerforums.com/table-mo...g-machine.html

===========
Quote:
Originally Posted by allthunbs View Post
I'm not familiar with the Ten Finger's product but the philosophy is similar to a gantry router but the operation is just like a template and guide setup. From what I can understand reading between the lines, I would look at "template tom's" essays throughout this and many other woodworking sites. I would seek out the Auzzie wood working site since he contributes frequently there. You might also read Harrysin 's essays throughout this forum.

Allthunbs
__________________
"It's fine to disagree with other members as long as you respect their opinions"

Marc Sommerfeld Tools ,Videos
http://www.youtube.com/channel/UCT-n...RWaEpMA/videos

Find all threads started by bobj3
http://www.routerforums.com/search.php?searchid=944097



Last edited by bobj3; 08-15-2009 at 07:50 PM.
bobj3 is offline  
New Reply

Bookmarks

Go Back   Router Forums > General Woodworking > Tools and Woodworking
IconIt appears you arenít a registered member of the Router Forums community. Why not spend less than a minute and register for the oldest and largest router and woodworking community on the web! Join in over 29,500 discussions with over 65,000 woodworkers. If youíre an experienced or beginner woodworker, your questions and knowledge is always warmly welcomed by our community. Register now for your FREE account!



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
How do I mount a Router to a table demaX Table-mounted Routing 3 04-16-2009 06:56 AM
Wadkin radial Arm Router --Help Please brko General Routing 11 03-14-2009 03:27 PM
Ridgid Router Easy Above Table Bit Change shawnpatt Table-mounted Routing 1 03-06-2009 04:58 PM
Radial Arm Router cabinetman Tools and Woodworking 12 04-27-2007 10:22 PM