tinman

I HAVE AN OLD STANLEY ROUTER, MODEL 82902, COULD ANYONE TELL ME WHERE I CAN GET A REPLACEMENT 1/4" COLLET FOR IT.

Advertising

ejant

Try contacting Stanley Tool customer service.
Try ebay or local flea markets.

__________________

reible

I don't know if this will help but back in the early 80's Stanley Power Tools Division was purchased by Bosch Power Tool Corp.

Ed

tinman

Thanks, I,ve Contacted Bosch And Stanley But No Answers Yet.

tinman

Update: for anyone with the same problem, i've found the bosch equivalent collet. The part is #3600499503.

reible

That's great!

Ed

johnj

I need parts for Stanler Router 82902

RGromet

I also have a stanley 82902 and can confirm that the 1/4" collet is available from Bosch: $22.00/+$7.00 S&H. Has anyone found 1/2" Collet? Bosch parts in S. Plainfield, N.J. has no listing for a 1/2". They do for a 3/8" and for various metric sizes. None of the metric sizes are equivalent to 1/2". Thanks.

RG

jgjones28

I have an old Stanley router also along with the original manual and some accessories. Technically, the 82902 is the model number for the router base. This base is listed as compatible with the Stanley 80258, 91258, and 91260 motor units. I have the 80258 motor unit and the 1/4" chuck is the only chuck listed in the documentation and parts list.

Hickoryknee

Hey, I have one of those... my collet is still good but lacking other qualities, The arbor lock is broken at the arbor shaft. What you offer for the collet?