Router Forums

Register Now!

It appears that you aren't a registered member, click below to instantly register and become a member of the RouterForums.com Community!

Register Now!

** Registration removes majority of the website advertisements **


Go Back   Router Forums > General Woodworking > Tools and Woodworking

Tools and Woodworking Mainly for general woodworking questions and comments you may also come here to ask questions, get advice and share your experience with power tools.


New Reply
 
Thread Tools Display Modes
Old 01-07-2005, 09:00 AM   #1
Julie
Registered User
Forum Geek
 
Julie's Avatar
 
Join Date: Sep 2004
Posts: 231
Julie is on a distinguished road

Question Outdoor Finish

Can anyone tell me if they've found a good outdoor finish.
I've read to use spar varnish, but I've also read to NEVER use spar varnish.
I want something to put on good outdoor furniture that hopefully I won't have to redo every year.
What works and what doesn't?
Thanks,
~Julie~
Julie is offline   Top - Reply with Quote
Alt Sponsor Post
Advertising



Alt Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Router Forums
   
Old 01-07-2005, 10:20 AM   #2
jerrymayfield
Registered User
Forum Geek
 
Join Date: Sep 2004
Posts: 467
jerrymayfield is an unknown quantity at this point


go to a store that mixes its own oil based colors and buy the base they use for their darkest outdoor paint.i have used almost everything for exterior finishes and nothing lasts more than two years most one year or less. this my third year with the clear base,so far still looks fine.
good luck
jerry
jerrymayfield is offline   Top - Reply with Quote
Old 01-07-2005, 01:53 PM   #3
Julie
Registered User
Forum Geek
 
Julie's Avatar
 
Join Date: Sep 2004
Posts: 231
Julie is on a distinguished road


So, Jerry, do you paint or stain the wood and then put a coat or two of that clear base over top?

thanks
~Julie~
Julie is offline   Top - Reply with Quote
Old 01-10-2005, 01:51 PM   #4
Julie
Registered User
Forum Geek
 
Julie's Avatar
 
Join Date: Sep 2004
Posts: 231
Julie is on a distinguished road


Since no one except Jerry (thanks Jerry) has replied, can I assume there is not really any good outdoor finish which holds up?

~Julie~
Julie is offline   Top - Reply with Quote
Old 01-10-2005, 02:13 PM   #5
Learning Herb
Registered User
Forum Fanatic
 
Learning Herb's Avatar
 
Join Date: Sep 2004
Posts: 132
Learning Herb is on a distinguished road


Julie~ I have tried every kind of finish out doors, I only one I find that will last a few years is the oil base stain ,I used it on the side of my house fore years ago and it still looks pritty good. Thay sell many diffirent kinds and colors. But remember the darker the color the more uv protection you have.As far as polys go thay bite the dust in a year or two .I'm sorry I can't be more helpful.But it really hard to get things to last out doors in the sun. Thank you much,,Learning Herb
__________________
I try to learn some thing new each and every day ,
Learning Herb
Learning Herb is offline   Top - Reply with Quote
Old 01-10-2005, 06:32 PM   #6
reible
Registered User
Supreme Forum King
 
reible's Avatar
 
Join Date: Sep 2004
Posts: 1,703
reible has a spectacular aura aboutreible has a spectacular aura about


This is interesting reading:
http://www.adirondackchairs.com/info/care_cleaning.cfm

Sorry I don't have more time to answer but I would have more questions then answers for you anyway..... so read then see if you have more questions.....

Ed
reible is offline   Top - Reply with Quote
Old 01-10-2005, 07:22 PM   #7
Mike
Senior Moderator
Supreme Forum King
 
Mike's Avatar
 
Join Date: Nov 2004
Location: Detroit, Michigan USA
Posts: 3,372
Mike has disabled reputation

Send a message via AIM to Mike Send a message via Yahoo to Mike Send a message via Skype™ to Mike

Julie, boats get about the worst exposure to the elements. Marine spar varnish works the best in many areas. UV inhibiters help to slow down the degredation. My suggestion is to contact professional shops in your area and ask their advice. You might also consider contacting the company whose products you intend to use and follow their recommendations. Most will have web sites and be happy to respond. Finally if your project is intended for outside use then teak or much less expensive cedar are naturally resistant to weathering, require no finish and look good for many years. One other thing, fasteners react to the wood they are installed in. The best reference I have found is the McFeely's cataolg. They explain the interaction and recommend the right fastener for the job.
__________________
Mike
Please edit your profile with a name and location so we can better assist you.
Mike is offline   Top - Reply with Quote
New Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Forum Jump

RouterWorkshop.net - EagleAmerica.com – Over 2,000 Router Bits - Your Advertisement Here! - Your Advertisement Here! - Your Advertisement Here!

RouterForums.com - Your online woodworking community!
Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. Copyright © 2008 - 2009 RouterForums.com Search Engine Optimization by vBSEO 3.2.0
Professional Web Hosting Solutions provided by: BeastInternet.com