AxlMyk

Hopefully Charles will see this. I need knives for this jointer. Wondering if Freud makes them. I'm looking at the c350 and c400 sets. The c400 set is 6 1/8 X 11/16 X 1/8" which looks to be real close to what I have on the jointer.
If not Freud, any suggestions besides the expensive, and not long lasting Jet knives will be appreciated.

__________________
Mike - Retired FoMoCo Tradesman
My Gallery @ http://www.routerforums.com/axlmyks-stuff/

Advertising

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Router Forums

bobj3

HI Mike

You may want to take a hard look at the item below they will last and last, plus when one gets dull just replace one of the cutters,,, it's not cheap but it will last forever.

Index Spiral Cutterhead
http://www.grizzly.com/products/6-In...tterhead/H7653

========

Attached Files

grizzly cutting head.pdf (788.2 KB, 12 views)

__________________
Bj

Jtomwoods

Mike,

I have the Jet JJ-6CSX jointer.

I've ordered Freud knives from Amazon. They are on the jointer now and seem to be okay but are a tad shorter than the Jet originals. I have also ordered from Global Tooling. They seem to be as good as the others and are less expensive. They are the same size as the Jet originals.
http://globaltooling.bizhosting.com/planer_knives.html

Tom

AxlMyk

Thanks Tom. Looks like this one fits.
http://globaltooling.bizhosting.com/...nfe_set_3.html
I can get Freud ordered locally, but there are 2 sizes. The c350 and c400 knives.
I'll have to take a blade out of the jointer, but I know they are 6 1/16" long.

__________________
Mike - Retired FoMoCo Tradesman
My Gallery @ http://www.routerforums.com/axlmyks-stuff/

Charles M

Mike,

For 6-1/16" X 5/8" X 1/8" you could get the C350 and be within 1/16" or you can order the C100 (25" X 5/8" X 1/8") cut into three 6-1/16" lengths. There is no additional charge for cutting to length.

__________________
Charles M
Freud America, Inc.

AxlMyk

Thanks Charles. I took the blades out and measured them. 6 1/16 X 11/16 X 1/8 so that puts them at the c400 size. Correct?

I noticed on the Freud website that there seems to be no direct link to jointer knives. You can search for the part number, but that was the only way I found them.

__________________
Mike - Retired FoMoCo Tradesman
My Gallery @ http://www.routerforums.com/axlmyks-stuff/

Charles M

They are hidden under the Power Tools heading:
http://www.freudtools.com/p-295-high...er-knives.aspx

If 11/16" is the correct width I recommend that you order the C400 and have us cut them to 6-1/16" to be sure they fit properly.

__________________
Charles M
Freud America, Inc.