steveo

Same continuing deal............ I don't know who will be the judge..
some of these that will follow in the following days, I don't have a clue either.
Maybe we'll have to vote on the answer to some.
let the fun begin..............

Advertising

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Router Forums

reible

Are there no teeth as it appears on part of wheel? I'm going to need some hints?????? What does the end look like? Come on show us somemore!!!!!

Ed

steveo

I guess some hints are in order, or at least further explaination of what happens when one "turns the crank". There are not continuous "gears" around the circumference of the "wheel". You'll notice the gear arrangement is somewhat different than you'd expect to see on a "hand drill" in your shop. Your hand drill, or your wifes egg beater, if you choose to go grab it, has only one set of gears on the vertical rod operating mechanism (one end of which one hangs on to for dear life). At the other end of this rod is a slot and a hole to place some sort of pin in it. Now can your mechanical minds get into "gear" and visualize what happens when you turn the crank?
Don't look at me, I don't know what the dang think is used for, but I do have an idea, but its just a guess no better than yours. I will take a lover of tools or an old timer to solve this unit. Ed, if its a bike tool, its pre 1940 for sure. (I'm sure its not.)
steveo

Woodnut65

Hi: My guess is that the tool pictured was used to twist wire around rebar used in
construction of foundations the wires used have loops at either end, insert a peg
through them and through the loop end of the tool, and turn the crank.
I would guess the at one time a handle was on the rod portion of the tool.

Woodnut65

steveo

Check the gears, the rod does NOT revolve 360 degrees like a drill. Follow the gears, the rod revolves about 120 degrees one way, then the gear on the "circle" hits the other gear on the rod and revolves the opposite way for about 120 degrees, while the opposite gear is in the clear. Unique and for what, who will come up with the use? I now don't have a clue either !
steveo