Register Now!

**harrysin** · 01-15-2008, 06:34 AM

The forum is light on with projects at the moment so here is a small one aimed at those with less than my four weeks turning experience.

**bobj3** · 01-15-2008, 07:27 AM

Thanks Harry
You do nice work

"Do you have less than 4 weeks experience ?? "

That's Me

Here's just one more
Podcast #26: Turning Pens on the Lathe: From Start to Finish
with many tips.....

http://www.woodworkingonline.com/200...art-to-finish/
--------
Drill press vise (cross type,XY)▼
Here's just one more tip, some come with V-Blocks jaws that just screw in place in the jaws...to hold the Pen blanks true for drilling.. plus a great tool for drilling wooden dowel rods on dead center..

and with some brass rod ,you can line up the vise and lock it in place,,,with two bolts...

http://www.harborfreight.com/cpi/cta...Itemnumber=538
http://www.harborfreight.com/cpi/cta...emnumber=94276

---------
http://grizzly.com/products/Cross-Sliding-Vise/G1064
http://grizzly.com/products/Prismatic-Jaw/G1065
======

Now if I can find someone to teach me how to use them after I make them.

=======

**harrysin** · 01-15-2008, 08:53 AM

If you've already watched the video that probably counts as equal to four weeks trial and error! Thanks for the link, I'll watch It as soon as I have the time in my busy pen making schedule!

**Glenmore** · 01-15-2008, 09:12 AM

Very nice pens Harry great photo shoot you keep them coming so you don't have to bug me about taking pics. hahahaha

BernieW · 01-15-2008, 10:10 AM

Very nice photo shoot Harry. Thanks I appreciate it.

curiousgeorge · 01-15-2008, 12:39 PM

Thanks Harry. Has it only been 4 weeks? You couldn't tell it by the quality of your work.

Dr.Zook · 01-15-2008, 02:00 PM

Nice job Harry. You can be proud.

**harrysin** · 01-15-2008, 08:11 PM

Quote:

Originally Posted by Glenmore

Very nice pens Harry great photo shoot you keep them coming so you don't have to bug me about taking pics. hahahaha

Thanks guys for you're encouragement and kind words. Glenmore, don't think for a single moment that I'm going to cease pestering you for photo-shoots, in fact I may well increase the pressure!

**harrysin** · 01-15-2008, 08:20 PM

"Now if I can find someone to teach me how to use them after I make them."

I missed this line first time round Bj. and I must say that you seem to be doing pretty good with everything else, so I must assume that it was said tongue in cheek.

**bobj3** · 01-15-2008, 08:25 PM

Hi Harry

Yep,,, but I need alot of white out when I use pens

if I just could find a spell checker IC chip to go in my pen(s)

=============

===============

Quote:

Originally Posted by harrysin

"Now if I can find someone to teach me how to use them after I make them."

I missed this line first time round Bj. and I must say that you seem to be doing pretty good with everything else, so I must assume that it was said tongue in cheek.

01-15-2008, 06:34 AM	#1
harrysin Forum Contributer Supreme Forum King Join Date: Jan 2007 Location: Western Australia Posts: 3,233 View harrysin's Gallery	Report This Post! Do you have less than 4 weeks experience? The forum is light on with projects at the moment so here is a small one aimed at those with less than my four weeks turning experience. Attached Thumbnails __________________ *Harry* Last edited by harrysin; 01-15-2008 at 06:39 AM. Reason: To correct number of weeks
	Top - Reply with Quote

01-15-2008, 07:27 AM	#2
bobj3 Forum Contributer Supreme Forum King Join Date: Jan 2006 Location: Littleton,Colorado U.S.A. Posts: 8,054 View bobj3's Gallery	Report This Post! Thanks Harry You do nice work "Do you have less than 4 weeks experience ?? " That's Me Here's just one more Podcast #26: Turning Pens on the Lathe: From Start to Finish with many tips..... http://www.woodworkingonline.com/200...art-to-finish/ -------- Drill press vise (cross type,XY)▼ Here's just one more tip, some come with V-Blocks jaws that just screw in place in the jaws...to hold the Pen blanks true for drilling.. plus a great tool for drilling wooden dowel rods on dead center.. and with some brass rod ,you can line up the vise and lock it in place,,,with two bolts... http://www.harborfreight.com/cpi/cta...Itemnumber=538 http://www.harborfreight.com/cpi/cta...emnumber=94276 --------- http://grizzly.com/products/Cross-Sliding-Vise/G1064 http://grizzly.com/products/Prismatic-Jaw/G1065 ====== Now if I can find someone to teach me how to use them after I make them. ======= __________________ PodCast videos RWS on YouTube http://www.routerforums.com/86898-post1.html Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables http://www.woodworkingonline.com/?s=dovetail Machine Cut ▼ http://www.woodworkingonline.com/200...cut-dovetails/ http://www.woodworkingonline.com/woo...podcast-store/ http://www.woodshopdemos.com/menu2.htm Bob J. Last edited by bobj3; 01-15-2008 at 11:25 AM.
	Top - Reply with Quote

01-15-2008, 08:53 AM	#3
harrysin Forum Contributer Supreme Forum King Join Date: Jan 2007 Location: Western Australia Posts: 3,233 View harrysin's Gallery	Report This Post! If you've already watched the video that probably counts as equal to four weeks trial and error! Thanks for the link, I'll watch It as soon as I have the time in my busy pen making schedule! __________________ *Harry*
	Top - Reply with Quote

01-15-2008, 09:12 AM	#4
Glenmore Forum Moderator Supreme Forum King Join Date: Sep 2004 Location: Mountain Top Pennsylvania Posts: 1,603 View Glenmore's Gallery	Report This Post! Very nice pens Harry great photo shoot you keep them coming so you don't have to bug me about taking pics. hahahaha __________________ Glenmore Days without wood working are days not worth getting up for.
	Top - Reply with Quote

01-15-2008, 10:10 AM	#5
BernieW Registered User Forum King Join Date: Sep 2006 Location: Goodland, Kansas Posts: 550 View BernieW's Gallery	Report This Post! Very nice photo shoot Harry. Thanks I appreciate it. __________________ Bernie W. Genius is one per cent inspiration, ninety-nine per cent perspiration.
	Top - Reply with Quote

01-15-2008, 12:39 PM	#6
curiousgeorge Registered User Supreme Forum King Join Date: Nov 2006 Location: Fort Worth,Texas USA First Name: George Posts: 1,536 View curiousgeorge's Gallery	Report This Post! Thanks Harry. Has it only been 4 weeks? You couldn't tell it by the quality of your work. __________________ George PLEASE! PLEASE! Fill in your first name and location in your profile. I like to know who you are and where you are from. If you don't want me to know who you are, then I don't want to talk to you.
	Top - Reply with Quote

01-15-2008, 02:00 PM	#7
Dr.Zook Official Greeter Supreme Forum King Join Date: Sep 2004 Location: New Lebanon, Ohio "USA" First Name: Dave or "Doc" Posts: 4,560 View Dr.Zook's Gallery	Report This Post! Nice job Harry. You can be proud. __________________ Dave the "Doctor" In woodworking there is no scrap, only firewood.
	Top - Reply with Quote

01-15-2008, 08:20 PM	#9
harrysin Forum Contributer Supreme Forum King Join Date: Jan 2007 Location: Western Australia Posts: 3,233 View harrysin's Gallery	Report This Post! "Now if I can find someone to teach me how to use them after I make them." I missed this line first time round Bj. and I must say that you seem to be doing pretty good with everything else, so I must assume that it was said tongue in cheek. __________________ *Harry*
	Top - Reply with Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bosch 1600 Router Experience	cwo2tt	General Routing	0	06-27-2008 01:37 AM
Bosch COLT experience?	tiredbones	Portable Routing	24	05-09-2008 02:18 PM
Anyone have experience with this Craftsman router?	kp91	General Routing	2	02-17-2007 05:04 AM
my other dresser	del schisler	Show N' Tell	9	05-01-2006 07:24 AM
Anyone with experience with Rikon tools?	kp91	Tools and Woodworking	2	11-25-2005 10:20 PM