Lathe tools

crquack

Many on this forum have pointed out that the cost of turning is rarely confined to the price of a lathe - in fact that is the smaller part of the whole outlay.

I have been looking at lathe tools which, in my neck of the woods, run in the region of $40-$50 per tool. EBay, however, has sets of about 8 tools going for close to $15-$20 per set.

Is this a case of "you get what you pay for" or is a cheap set OK for occasional use? What do you look for in a lathe tool?

Advertising



Remove these advertisements by registering for your free RouterForums.com account today!

Timeman

Hi..

I think you will find after turning for over 10 years that you can not use low cost tools.. Now in saying that tools are not cheap as our modern day industries need to compete.

Its all in the steel and what has been done to it that makes a good wood turning tool
carbon steel chisels are ok but low budget one's will be of there depth with hard woods..

solid HSS

Good lathe tools are M2 High Speed Steel and tempered to Rockwell hardness 62/64 for razor-sharp cutting and demanding turning conditions.

Henry Taylor

Robert Sorby

Crown Turning Tools

You cal all so get some high grade HSS and shape your own as we do.. find older brands as well like marples and others.

All so at the end of the day you could use anything with in reason of course, But there is room for understanding the sharping and technical side to a good working lathe tool.

I hope this helps Being from Australia I get lots of hard woods so most of my work is done with good tools that are of good steel HSS.

cheers from Noel

Bob N

Noel has given you some excellent advise and he is dead on the money. I would only add that if you are brand new to turning, a cheap set to start off might be wise so you will not waste good steel while learning to sharpen. Once the learning curve is accomplished, then I would invest in one of the better sets as Noel advises.

__________________
a/k/a "Grumpa"

bobj3

HI crquack

It's been a long time for me to buy any lathe tools but the lathe tools off eBay are what they call 8 piece tent stakes

You can find some great lathe tools on the NET and you don't need to pay 40 to 50 dollars each..

Here's just one of many you may want to check out
http://www.pennstateind.com/

========

__________________
MLCS Instruction Pages & Videos
plus FREE MLCS Project Plans
http://www.mlcswoodworking.com/shops.../instruct.html

Part Finder
find parts for your power tools
http://www.ereplacementparts.com/
Need some help replacing the parts
http://forums.ereplacementparts.com/

Many Router Tips from RWS
http://www.routerworkshop.com/router_tip_glossary.html
http://www.routerforums.com/email-ro...-members-only/

Router Tables ,Ready to use
http://www.rt1000.com/
http://rt1000.com/_wsn/page2.html

Bob J.

BernieW

Here is the first set I bought. What is funny is I have bought over the years much more expensive tools and still find myself reaching for one of these. I have had these now for 3 yrs still use most all of them and I don't think there is much better for the money. Most of those on ebay as was said are not much more than tent stakes or junk IMHO.

http://www.pennstateind.com/store/LCHSS8.html

Here is another place to look. You will notice he is a one man shop and sells out of a lot of stuff but just keep checking back. I don't think for the money his tools can be beat. I have 2 of his V-shape bowl gouges, 2 of the U-shape bowl gouges, 2 of his spindle gouges, and 2 of his detail spindle gouges. They are run thru a 13 step process which includes powder metal and cryogenics treated which means that I can turn 2 to 4 bowls without going to the grinder. They stay sharp longer than any tool I have and are reasonable. I wish I would have known about him before I bought a lot of my other tools.

http://www.thompsonlathetools.com/default.asp

__________________
Bernie W.

aka Poppa

A bad day of turning is still better than a good day at the office.

curiousgeorge

Here is a set you might want to check out. They are on sale right now.

http://www.shopsmith.com/ownersite/c...sel_5pcset.htm

__________________
George
For those who haven't already done so...
PLEASE! PLEASE! Fill in your first name and location in your profile.

crquack

Thank you all. Lathe is here in a contemplative stage only and I like to collect a lot of information before I decide on anything.

All of your comments make perfect sense.

chippypah

Turning tools are as important as the lathe itself, what is the point of spending lots of $ on a lathe and not so many $ on chisels. As Noel has posted, there is a lot of difference in what you pay for.
Cheers
Pete

__________________
www.chippypah-workshop.co.uk