Does anyone have a drawing of the hole setout for a Dewalt DW625ek type 4 base plate? I have been searching for this for a long time on the web and have even contacted DeWalt. Amazingly they say they don't have one! The only drawing I can find (on this site and also from DeWalt themselves) shows linear dimensions between the mounting holes but does not provide a pitch circle diameter. Without this the dimensions are of no use. Also the drawing gives no reference to the cutter center lines. Ideally I need a drawing that gives the set out for the holes and the cutter centre relevant to x and y reference lines. If anyone can help I would be very grateful. I would have thought this is something that router manufactures would include in the user manual!