Router Forums - View Single Post - Freud FT1700 table mounted router - dust collection
View Single Post
post #4 of (permalink) Old 11-22-2009, 05:20 PM
jschaben
Forum Contributor
 
Join Date: Jun 2009
Country: United States
First Name: John
Posts: 3,046
 
Default

Quote:
Originally Posted by bigadam View Post
Thanks, it just appears that the dust chute would not let the router go all the way up to my plate but I'll give it a shot. Does this dust chute work well for you or do I need to put a cabinet around the router table?
Hi - I have the same setup. The dust chute works very well. I needs to be installed with the exhaust chute OPPOSITE of the height clamp. Exit is out of the front of the router so to speak. You will need to leave the subbase on the router but it has a long enough armature shaft to still allow above table bit changes.
Hope this helps

John Schaben

The problem with experience is I usually get it immediately after I need it.
jschaben is offline  
 
 
For the best viewing experience please update your browser to Google Chrome