Router Forums - View Single Post - cutting a kerf
Thread: cutting a kerf
View Single Post
post #1 of (permalink) Old 07-25-2005, 01:17 PM Thread Starter
Join Date: Jul 2005
Posts: 7
Default cutting a kerf

I need to cut a very thin kerf about 3/64" in various shaped woods. They are oval, round and rectangular. The wood is 5/8" to 3/4" thick. The kerf has to be in the center of the edge. In other words as the piece lays flat I need to cut the kerf (groove) in this edge all the way around. I don't know a thing about routers but I am handy and will buy what is needed. The kerf is used by basket weavers to insert the reed to start making a basket. Thanks for any advice. Vince
VDenchy is offline  
For the best viewing experience please update your browser to Google Chrome