Router Forums banner

(CNC) How to Tune Motors with A TinyG

1K views 3 replies 4 participants last post by  old55 
#1 ·
Hi, I am a high school student in an Engineering class. My group and I are building a CNC Router out of a TinyG, 3 NEMA 23 Motors, and a spindle speed controller. We have got our motors running on jog mode through the Universal G-Code Sender, but we cannot figure out how to send codes to the TinyG through either the Universal G-Code Sender or through Coolterm. We have tried to send $100, $101, and $102 GRBL codes to edit the steps/mm, but we have never successfully sent the codes. We have also tried other codes to tune our motors, but neither our group nor our teacher can figure out what codes to send, or where to send them. If you have any ideas, please send them our way! Thanks.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top