Router Forums banner

( No Init File )

2K views 2 replies 3 participants last post by  old55 
#1 ·
Hi ..
I have an MuliCam (3000) router cnc .. work s with ..( ArtCAM 2008 .. CAD design program )
… and ( with Sentinel system driver Installer 7.4.0)
the Multicam Ez Controller digital screen .. shows error : ( No Init File )
which is means missing data files ..( the XMI file ) in machine programming software .
so what should i do to resolve this problem
best wishes
 
#2 ·
Has it ever worked, or is this a sudden problem with just one file?

File errors can be created by removing thumb drives or USB hard drives without safely ejecting them.
Files made with the wrong post processor can also cause missing data errors.
Your control software may be trying to load an initiation file which it can't find or is corrupt. Corrupt files can happen if you have a power out while the file is being accessed. They can also happen spontaneously as an older hard drive starts to fail.

There are no doubt other causes out there for the error you are getting. The above are just a few of the first things I look into when I get such errors.

4D
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top