What with the bread box completed, and the next stools not needing too be done till end of January, I continue with where I left off a few weeks ago with wood storage and DC in the down garage.
It is 5:09 AM and I have been working for the past 3 hours, strange, not for me, I like these early hours, fewer distractions it is when I can get the most done.
My last post 12/04 is where I will pick up. Yesterday I fabricated four vertical risers to hold the shelves brackets, in this case 2x4's 14"to 18" set every foot giving 8.5"to stack the wood. These shelf brackets are adjustable every foot. The construction is 2x4 sections spaced ever foot and held in place by the continues 1x4, (first two photos ) all this is glued and screwed to a 2x6 running floor to above ceiling ( wall construction here is concrete). At the top they are held by a bracket from the top to a truss (last photo), at the bottom I have attached a 2x10x12 and will shoot it to the floor using my "Ramset" I picked up off Craig's list for 40.00 (used on one job, and sells at HD for 200.00). ( will be posting that later today), I don't do that till Honey is up if you know what I mean.
Wisdom: Where experience and knowledge combine and become one.
"We are all one decision away from Stupid!!"
"How often we sacrifice the permanent plans of God on the altar of immediate solutions"
I have a very good memory, just short is all.