Dovetail Table Frame
A customer asked me to make him a table frame. He has a piece of Bubinga 4' 6" wide and 10' 6" long.
He also has some Douglas Fir to make the legs and apron. He is a business man here in town but he is
taking the frame to one of his homes in another state, so I had to make it in pieces so he could transport it.
I cut one side of the dovetail on the table saw (2x6 is a stop) The other side I used a circular saw. I hogged
out the middle on the router table (had to use an extension). The end pieces 6x6's are glued together. The
long 4x4 side pieces he will just have to drop in the dovetail slots when he gets it home. The cracks in the 6x6's
were filled with epoxy. Couple coats of Danish Oil on it.