Whenever I do a project, I trot my router and other projects from a large closet and hallway to the patio in the backyard. I use a dolly for the table saw.
I sometimes envy a workshop dedicated to machines and projects, but I just don't have the room.
Just wondering if I'm the only one.
Someday when I'm rich I hope to move to a larger property with a workshop, or else I'll build one.
David you are the kind of woodworker I admire most, against the odds and with difficulty you still pursue the hobby. I may have a shop and all but you swim up river to get it done. I would imagine that what you produce out of your closet shop would show up anything I could produce out of my shop!!!
So to you and anyone on here that works through the same handicap I say "Hats of to you and charge on".
I'm aware of one fellow that uses his bathroom. The tub is the sawdust catcher. I saw a picture of it someplace. He had his chop saw setup so the sawdust went out the back, and into the tub.
I keep both cars in the garage and all tools out of the way to the sides. When I work, both cars leave the garage (temporarily) and I pull the tools out. Sometimes only 1 car goes back in if the piece I am working on won't fit out of the way. I understand your situation. I am quite the amateur and only a beginner. I'm not ready to dedicate too much space just yet.
I know exactly what you mean. When I first started woodworking I lived in Seattle Wash and was sharing a 3 bedroom apt on the 3rd floor with my wife her mom, brother and her sister, and 6 cats. yes cats! all of my woodworking tools were in the dining room disguised as other things the kitchen table was actually my table saw with a 1/2 sheet of plywood on top with a tablecloth on it the end table lamp was actually my drill press and yes the light was used as a table lamp and many more things I was just asked not to do wood working when x files was on. so I know just how you feel, great post and thanks for bringing up the memories.
Even when you get more space, you still look for more. I too have used the back patio for sanding so the dust wouldn't float in the garage. It's a two car garage that only fits one anyway. All my tools have to be rolled to the sides or stuffed in a shelf somewhere. No your not the only one. Look in the background in these pics.........no laughing.
Even when you get more space, you still look for more. I too have used the back patio for sanding so the dust wouldn't float in the garage. It's a two car garage that only fits one anyway. All my tools have to be rolled to the sides or stuffed in a shelf somewhere. No your not the only one. Look in the background in these pics.........no laughing.
Nice looking doors at least they look like doors, The out feed table is outstanding, I have a brother in law that keeps both cars in the garage and when he work, he backs them out and does his woodworking, he is in the Houston Tx area, south of Houston in Friendswood, has an A/C unit in the garage which is nice and turns out some above average work. I will get around to posting some of his work when I get the pics in a more manageable size.
Misery loves company. Ah, I feel MUCH better knowing there are others out there who don't have those fancy shops (yes, jealousy) but yet keep charging anyway!
This is my very first posting. I hope I'm doing it correctly. Although I have a double garage which has to accommodate 2 cars I have room for a wide shelf which I use for marking out etc. I have a B&D Workmate which I've had for about 50 years and I've adapted my table saw, mitre saw, router table, belt/disc sander and metal cutoff saw to all work off this workmate. I suggest you get yourself a workmate which will solve pretty well all your problems.
The closest I have come to a shop is this winter when I have been using part of the basement that is just barely big enough for the table saw, dust collector, a rolling shelf cart that I put a piece of plywood on for a bench and me. The rolling shelf cart is constantly being moved around so that the doors behind me can be used or so that my Wife can get into the freezer or the fridge.
I am used to having everything in the garage and having to haul it all out or rearrange the garage to do anything. And this was before I started attempting to actually make things out of wood. It was to just simply work on anything that I had to go through it all. I used to have the rolling shelf cart out there plus a workmate like thing from menards, but often would end up using the tailgate of the pickup to lay things out and work on them.
Now that weather is warming up I am hoping to get some of the stuff that is in the way inside out into the garage so I can continue to do the wood working inside. Nicer to be in conditioned air (hot or cold) plus I can work later at night as the sound from the basement doesn't carry around the neighborhood like the sound of doing things in the garage does.
No, you are not alone. I'm currently renting a ground floor apartment until I build my house and workshops. My metalworking stuff is still in store and my woodworking stuff has to be pulled out on to the patio to work with. My Triton 2000 is on wheels, my sliding mitre saw is on a stand with outfeed rollers, my Triton router table pulls outside and everything else is on four Workmate clones including the Woodrat. The living room is a warehouse and totally unusable for its intended purpose !
I use a one car garage in the basement. I'm trying to figure out how to re-arrange everything so one side will be shop and the other side for all the other stuff we have accumulated in 37-1/2 years. I did go to Lowe's last night and price 2X2's and cheap OSB to build a divider wall to keep the sawdust confined. Will use the Shop Vac and a box fan with a furnace filter for my DC. I keep the porch light on so they can find my house to give me the $10 million PCH check. So far, they keep getting lost!
As for cars, we have never had a car in a garage due to tools, kid's toys, etc. Closest thing was a carport in our home in Kentucky.
We haven't used a garage since she bought Her last new car. Went from a 1996 Oldsmobile Cutlass Cierra with 176,000+ miles to a 1996 Ford Crown Victoria with 186,000+ miles with the police interceptor engine. The other vehicle is a 2003 Dodge Ram Quad Cab.
We used to fit the olds, even did two 1985 Oldsmobile Delta 88's for a while. It used to be one of those and an 1956 Lincoln Premiere in the garage with enough room to open all 4 doors on the olds and the driver's door on the lincoln. Couldn't do the passenger side as we would slide it over till it almost touched the wall to prevent any chances of the door of the olds hitting it.
Now it has turned into almost total storage with 4 6' high x'4 long steel shelves on casters, a full size desk, 2 huge file cabinets, an old computer desk with hutch and some other shelf on the one side. The other side is all cabinets or drawers of various sorts until the last 8 feet which is built in shelving...still used to park the cars with it there as it wasn't enough to bother opening the door, but you did have to go around the car to come in through the garage entry.
Since then added a golf cart, been 1 to 3 mobility scooters in there at a time, the old table saw which used to be stored in the shed and only brought out when needed. With all of this stuff, plus take away the 4 feet or so at the back on 1 side for the steps and a 19.5'x 24' garage gets rather small in no time at all. If we could just convince some one to part with 90% of what is in the non-book storage boxes it would be a lot better.
The desk does get used for a side project she has of selling hand dyed linen or something and selling older comic books when she has found a batch worth taking a chance on for resale. Been over a year since any sold, but did get a batch last fall that needs sorting and pics taken so they can be sold.
When I first started I had lots of space (read outdoors) and few tools, now many years later I have lots of tools and somehow my shop has shrunk so by this weekend I hope we'll break ground on an addition and give me a total of 300 sq. feet. My wife is getting me the addition for my retirement.
I have a 3 car garage. The cars sleep in the driveway. The garage is ful to the brim with tote-homes. There is barely enough room for T saw, planer, B saw, M saw and shop vac. I am in the process of putting everything on rollers for toten to the driveway. Current project is a bench with retractable wheels.
Wheels is a great solution Daryl.. I use them extensively. The other thing I did last spring was to tell my wife that "In 2 weeks I want to start cleaning out the garage, giving away or selling a lot of stuff. If you would like to join in, you are welcome and then would have input on what stays and what goes. If you do not want to participate, you'll need to trust my judgement. I'll try to keep the things of value and that you'd like to keep, but my mission is to dispose of 70% of the volume that is there, put 20% in the outside storage shed, 8% in the house, and store a few items in the garage." I gently mention this every 3 nights or so, hoping she'd decide to join me. She didn't so I drafted my son for assistance. A couple of weekends later there was lots of room in the shop, the storage shed was full, we had trashed a lot and given to "Good Will". Because the storage shed is packed so tightly and we were working so quickly, I'm not positive about a lot of the stuff that went out there. When she asks about a certain item (if I can't remember) I honestly tell her I'm not positive but I *think* it's in the shed. So far, it's worked like a charm.
If you have a stuffed garage and would like the space back, consider this approach. If a one-time expenditure of a couple hundred bucks to set up a metal or (Rubbermaid) plastic shed out back gives you the garage back as a shop, is it worth it? Spring time is when people move and they often show up on Craigslist.. at least around here!!
I decided last year that I'm going to stop waiting until I get a bigger and better house to have a workshop. My resolution was that in the summer months I would set up "shop" in the 1 car basement garage and leave all my tools setup and ready to go. Then in the winter, they all get put away and brought inside so we can have car storage and snowthrower, etc. Besides, for me anyway, the winter months are a pain with the holidays and unpredicatable weather, and not to mention the garage is uninsulated and not heated. So it works out. Actually, I'm getting ready to get started for the season. Just today I finsihed running 2 new 20 amp circuits from the panel to the garage ....just for me and the tools.....ha! I'll have 2 duplexes every 8 feet or so. Then I'm good to go. So no, I don't really have a shop, but I found a way to make do with what I have. Good luck.
I have no garage, no workshop, no table saw even.
I have about 3m2 in a overly cluttered communal basement where I have enough space to make chopsticks !(no kidding, last winter i resigned myself to making chopsticks)
Now the weather is getting better I have to drag my stuff up some stairs out onto a decent sized terrace that only I use. The neighbors aren't fond of the noise and dust I create though. Probably why they're trying to sell up.:haha:
144sqft shed, here. It's getting better, though. Not much room for big tools, no TS, DP or the like. Just two work tables and a router table, and that will have to come outside when I want to use it.
I saw a woodworking magazine a few years back that had a small workshop in a 12x12 shed, complete with a large table saw and biesmeyer fence. I will try to see if I can dig it up this weekend.
Like they say it's not the size of the tool it's what you can do with it..
I recall talking to a old wood worker and he used a old 6" table saw,he projects all look great I was amazed what he did with just a little table saw and that's just about all. his work shop was on his back porch about a 3' x 6' room..and a saw horse or two..
===
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Router Forums
747K posts
128.1K members
Since 2004
A forum community dedicated to router and woodworking professionals and enthusiasts. Come join the discussion about different types of routing and routers, shop safety, finishing, woodworking related topics, styles, tools, scales, reviews, accessories, classifieds, and more!