Stanley H14a Router (R2D2)
Don't know if anyone has answered, but on the top of dome is a round button (flush with top). Just push that down and it will lock the motor so you can tighten the bits in the collet. I ended up with my dad's ole router. I started using this unit when I was about 8 years old, am now in my 70's. Don't know when my dad purchased this, but it was new and for a router, has about equivalent of a million miles on it". He was a cabinet maker and used it all the time! Along with that, I also have his old delta 2 inch belt sander and other equipment. These are all stored in some of the best carry caress you could buy in the late 40's-early 50's. 50 caliber ammo boxes. Carry well and protect even better. 1 for router, 1 for electric drill, and one for 2" belt sander. Along with these, is the 8 inch Delta table say and 4 inch jointer. All still work well, but currently stored away due to lack of space at new house.