Router Forums banner
Cancel
Add bookmark
Incra Cleansweep insert ring.

Incra Cleansweep insert ring.

  • 0
  • 0
Grizzly power switch with Off paddle. Wixey WR525 height gauge.

Grizzly power switch with Off paddle. Wixey WR525 height gauge.

  • 0
  • 0
rear of router table showing 4" DC port and power cord organizer.

rear of router table showing 4" DC port and power cord organizer.

  • 0
  • 0
Drawers are 22" deep, blum slides. boxes were formed with 1/2" baltic birch and lock rabbet construction.

Drawers are 22" deep, blum slides. boxes were formed with 1/2" baltic birch and lock rabbet construction.

  • 0
  • 0
Router table. Carcase is made 3/4 plywood. Pocket holes in some places. Face framing is cherry. Drawer fronts are clear vertical grain 3/4" p

Router table. Carcase is made 3/4 plywood. Pocket holes in some places. Face framing is cherry. Drawer fronts are clear vertical grain 3/4" p

  • 0
  • 0
Table top is 27x44. Made of a 3/4" Baltic Birch core with top and bottom laminations of 1/4" hardboard. Edging is 3/4 x 3/4 cherry. Bottom

Table top is 27x44. Made of a 3/4" Baltic Birch core with top and bottom laminations of 1/4" hardboard. Edging is 3/4 x 3/4 cherry. Bottom

  • 0
  • 0
PhilBa

Router table

This is a router table I built for an Incra LS positioner. The lift is a JessEm/Incra Mast-R-Lift II with Incra Cleansweep insert rings, the router is a Porter Cable 7518 and it has a Wixey WR525 height gauge. Below table dust collection.
Click to expand...
There are no comments to display.

Album information

Album owner
PhilBa
Date created
Item count
6
View count
218
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

PhilBa

PhilBa

Media items
6
Albums
1
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top