|Topic Review (Newest First)|
|07-13-2016 02:08 PM|
|Nickp||...my Rikon 14 is set up the same way...|
|07-13-2016 04:35 AM|
|hawkeye10||Thanks for the picture Bob.|
|07-13-2016 01:13 AM|
Heres a pic of mine |
|07-12-2016 05:43 PM|
Originally Posted by sunnybob View Post
|07-12-2016 02:53 PM|
What stick said. |
Mine came with a brush.
just as the blade disappears into the lower box, theres a 45 degree angle plate with a slot in it that the blade passes through, The brush is fixed to that so it scrubs the inside of the bleade before it touches the wheel. theres an extraction port there as well, so the dust is sucked away.
|07-12-2016 12:09 PM|
fitted angle brackets made from Simpson framing brackets...
bolted to the machine and the brushes screwed to the bracket..
mounted so there is no play and the blade's teeth don't eat up the brush..
the brush is nothing more than a finger brush...
in fact it came w/ a bottle of orange hand cleaner...
but after all the futzing around...
seriously upgraded the DC...
now that made a difference...
|07-12-2016 11:58 AM|
Originally Posted by Stick486 View Post
|07-12-2016 11:10 AM|
|Stick486||below the table and before the drive wheel...|
|07-12-2016 11:02 AM|
Another band saw question.
I have Grizzly 14" BS and was wondering how to attach and where to install a brush to somewhat clean the blade