|Topic Review (Newest First)|
|06-18-2012 10:51 AM|
No problem at all, glad I could help for a change :-). |
Does it have to be Kregs reduction rings, or would another company's help. Cause I know I've seen a few who sell them?
|06-16-2012 07:45 AM|
Thank you very much Anthony. |
I couldn't get that measurement from Kreg for some unknown reason but, since that time, I've discovered that they do not sell the rings separately anyway.
|06-16-2012 04:06 AM|
|amassey08873||Failed to get these in with the last post. >>><<<|
|06-16-2012 04:03 AM|
Kreg Insert Plate Reducing Ring Diameter
4 1/4" If I understood you correctly see picture. There is a 5 16th's of an inch lip. Or Rabbet. Including the Rabbet 3 5/8ths" Give or take a 32nd / 16th of an " Eyeballed it
Hope this helps.
|06-04-2012 10:19 AM|
Thank you David. |
But, I really meant the outside of the insert, or, the hole size in the plate.
|06-04-2012 12:43 AM|
|david cooksey|| |
Kreg Blue Insert Plate
Hole Dia. is 1 31/32"
|05-23-2012 10:01 AM|
Anyone use the Kreg insert?
I am trying to find the outside diameter of the replacement insert ring on the Kreg plate. I am trying out an idea which would involve those rings but, the measurements can be found nowhere.
Any help would be greatly appreciated.