I'm working on it Bruce. I scanned all the pages as jpegs and I'm trying to figure out how to convert to a single pdf file if possible. I could email you all the jpeg images for now if you need them, there are almost 20 of them with the parts list which you would need to see if there are any differences from mine to yours.
Mine is a SA 380. The manual says 15" but it is actually 16" wide as I planed some 6 x 16 timbers for a friend once. It also is called an Autoplaner. There are several other brands that use the exact same castings that I've seen, such as Delta and Jet. It was manufactured by a company in Taiwan and sold under several labels. Mine will plane 2 x 10s on edge but others, and I think later models of the King, used shorter posts and will only do 6+". I've replaced one feed roller and had to level the head to the bed (it came from the factory out of adjustment) so I can walk you through the processes if needed.
Someone I consider a master woodworker once told me that a master woodworker is not someone who never makes mistakes. He is someone who is able to cover them up so that no one can tell.