router vibration on router table - Router Forums
 
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 02-12-2009, 11:59 AM Thread Starter
 
Join Date: Feb 2009
Posts: 1
 
Default router vibration on router table

hi everyone

can any one help i have a fox router table with a Erbauer router fitted
really bad vibration when in use
is there any pad i can fit between router and table
beard4460 is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 02-12-2009, 12:53 PM
Forum Contributor
 
Join Date: Jan 2006
Country: United States
First Name: Bj
Posts: 23,786
       
Default

HI beard4460

Let me say right off the bat you should NOT have any vibration.. or to say very,very little..

You may want to make sure the router is in place right and tight in place.

Chuck up a 1/4" dowel pin and see if you have the same type of vibration if so pull the router out and check the collet and the bearings..if they are damage replace them..the router is made to spin very true..on dead center..if it's router router plate that is not right put in some small 1/8" x 3/4" dowel pins in the two corners to keep it from moving around,but don't screw it down with screws, you want to pop it out from time to time..



=========



Quote:
Originally Posted by beard4460 View Post
hi everyone

can any one help i have a fox router table with a Erbauer router fitted
really bad vibration when in use
is there any pad i can fit between router and table



"It's fine to disagree with other members as long as you respect their opinions"

Marc Sommerfeld Tools ,Videos
http://www.youtube.com/channel/UCT-n...RWaEpMA/videos

Find all threads started by bobj3
http://www.routerforums.com/search.php?searchid=944097


bobj3 is offline  
post #3 of 4 (permalink) Old 02-13-2009, 02:00 AM
Forum Contributor
 
Dr.Zook's Avatar
 
Join Date: Sep 2004
Country: United States
First Name: Dave or "Doc"
Posts: 10,715
 
Default

Welcome to the forums beard4460.




Dave
the "Doctor"

In woodworking there is no scrap, only firewood.



Dr.Zook is offline  
Sponsored Links
Advertisement
 
post #4 of 4 (permalink) Old 02-13-2009, 03:25 AM
Forum Contributor
 
xplorx4's Avatar
 
Join Date: Dec 2008
Country: United States
First Name: Jerry
Posts: 10,671
 
Default

Greetings and welcome (your name here) to the forum good to have you here. You won't get any better information than from BobJ. I sure seems if it is called a router he is "dead on right" about it.

Wisdom: Where experience and knowledge combine and become one.

"We are all one decision away from Stupid!!"

Lamentations 3:22-23

"How often we sacrifice the permanent plans of God on the altar of immediate solutions"

I have a very good memory, just short is all.
xplorx4 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Router Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem mounting Dewalt Router to Caftsman Table Saw apollo2000 General Routing 15 01-26-2015 03:30 AM
Craftsman Router with Wolfcraft® Folding Router Table WoodCrazy Table-mounted Routing 2 01-05-2010 02:12 AM
Already Problems neuschu New Member Introductions 11 12-15-2009 08:01 AM
New Router Table RustyW Show N' Tell 10 08-28-2006 02:23 AM
New poster: Help! Husband wants router for Christmas! Emmie General Routing 21 12-17-2005 09:54 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome