Tear Out - Router Forums
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 12 (permalink) Old 04-02-2011, 09:41 AM Thread Starter
Registered User
 
thevirg's Avatar
 
Join Date: Nov 2010
Country: Canada
First Name: Virgil
Posts: 4
 
Default Tear Out

To combat tear out at the end of a piece, I often feed left to right and climb cut just a bit of the material. I then feed it right to left to route the rest of the material. It seems to work well for me

Is this a bad tecnique for any reason?

Thanks
Virg.
thevirg is offline  
Sponsored Links
Advertisement
 
post #2 of 12 (permalink) Old 04-02-2011, 10:03 AM
Forum Contributor
 
Join Date: Jun 2009
Country: United States
First Name: John
Posts: 3,046
 
Default

Quote:
Originally Posted by thevirg View Post
To combat tear out at the end of a piece, I often feed left to right and climb cut just a bit of the material. I then feed it right to left to route the rest of the material. It seems to work well for me

Is this a bad tecnique for any reason?

Thanks
Virg.
Hi Virg - Not a method I would recommend right off the bat. If you do want to do it that way, I would recommend you do the climb cut LAST. ie. run your profile up to within, say, half an inch from the end and then feed that last half inch in backwards. Theory here is that if the bit does grab it, it will run out of material quickly. Doing the climb cut first gives the bit the whole stick to work with.

John Schaben

The problem with experience is I usually get it immediately after I need it.
jschaben is offline  
post #3 of 12 (permalink) Old 04-02-2011, 10:48 AM
Forum Contributor
 
Join Date: Jan 2006
Country: United States
First Name: Bj
Posts: 23,786
       
Default

Hi

DANGER, DANGER Will Robinson,, using a push block to support the wood and at the end of the pass works well for most, if you have stock with knots in it you can use the pocket way, that's to say side the bit into the edge of the stock and put in pockets so to speak, this will beak up the grain of the stock and stop the rip out..using the climb cut can be very tricky if you feel like you want to use it ,never cut deeper than a 1/8" deep cuts.

http://www.google.com/imgres?imgurl=...ed=0CC8Q9QEwBg

=======




"It's fine to disagree with other members as long as you respect their opinions"

Marc Sommerfeld Tools ,Videos
http://www.youtube.com/channel/UCT-n...RWaEpMA/videos

Find all threads started by bobj3
http://www.routerforums.com/search.php?searchid=944097



Last edited by bobj3; 04-02-2011 at 10:56 AM.
bobj3 is offline  
Sponsored Links
Advertisement
 
post #4 of 12 (permalink) Old 04-03-2011, 01:01 AM
Official Greeter
 
jw2170's Avatar
 
Join Date: Jan 2008
Country: Australia
First Name: James
Posts: 18,197
 
Send a message via Skype™ to jw2170
Default

"upgrade windows 95".......LOL

Where did you find that site, BJ


To combat tear out at the end of a piece, I would use a backer board.

James
Sydney, Australia
.

I don't mind if other members disagree with my comments.
I don't profess to know everything, and I may learn something new.

"Never attribute to malice that which is adequately explained by stupidity."




jw2170 is offline  
post #5 of 12 (permalink) Old 04-03-2011, 05:39 AM
Registered User
 
derek willis's Avatar
 
Join Date: Jan 2009
Country: United Kingdom
First Name: Derek
Posts: 988
 
Default

Of course you would, James, how else.



A friend is a good egg even if they are slightly cracked!

Derek
derek willis is offline  
post #6 of 12 (permalink) Old 04-08-2011, 09:46 AM Thread Starter
Registered User
 
thevirg's Avatar
 
Join Date: Nov 2010
Country: Canada
First Name: Virgil
Posts: 4
 
Smile

Thanks for your responses guys.

Virg.
thevirg is offline  
post #7 of 12 (permalink) Old 04-08-2011, 09:52 AM
Forum Contributor
 
Join Date: Jan 2006
Country: United States
First Name: Bj
Posts: 23,786
       
Default

Hi James

Many still use win95, LOL and the 3.0 ver. of Windows.

Annoyances.org - Windows 95 Discussion Forum

=========



Quote:
Originally Posted by jw2170 View Post
"upgrade windows 95".......LOL

Where did you find that site, BJ


To combat tear out at the end of a piece, I would use a backer board.



"It's fine to disagree with other members as long as you respect their opinions"

Marc Sommerfeld Tools ,Videos
http://www.youtube.com/channel/UCT-n...RWaEpMA/videos

Find all threads started by bobj3
http://www.routerforums.com/search.php?searchid=944097


bobj3 is offline  
post #8 of 12 (permalink) Old 04-08-2011, 11:53 AM
Registered User
 
istracpsboss's Avatar
 
Join Date: Sep 2008
Country: Croatia
First Name: Peter
Posts: 1,683
 
Default

Cash registers here still use DOS !
istracpsboss is offline  
post #9 of 12 (permalink) Old 04-08-2011, 12:18 PM
gav
Registered User
 
Join Date: Oct 2009
Country: Croatia
First Name: Gavin
Posts: 777
 
Default

Peter, the ministry of interior (MUP) in Zagreb still use dos.
gav is offline  
post #10 of 12 (permalink) Old 04-08-2011, 01:02 PM
Forum Contributor
 
Join Date: Jan 2006
Country: United States
First Name: Bj
Posts: 23,786
       
Default

Hi

I still use DOS for my POS software program (Champ Products for Cash Registers/bar code items )

======




"It's fine to disagree with other members as long as you respect their opinions"

Marc Sommerfeld Tools ,Videos
http://www.youtube.com/channel/UCT-n...RWaEpMA/videos

Find all threads started by bobj3
http://www.routerforums.com/search.php?searchid=944097


bobj3 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Router Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Best method to band plywood without tear out Slomoe Router Bits - Types and Usage 8 02-26-2011 11:06 AM
a tear out problem loninappleton Table-mounted Routing 3 09-23-2010 08:39 PM
Baltic Birch Tear Out Ross Wigle New Member Introductions 7 01-06-2010 10:16 AM
jig for tear drop hole gabers Jigs and Fixtures 5 01-29-2009 02:56 PM
Katie Jig and tear out S Bolton Jigs and Fixtures 8 10-04-2008 04:24 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome