help me - Router Forums
 
LinkBack Thread Tools Display Modes
post #1 of 5 (permalink) Old 07-07-2011, 08:39 AM Thread Starter
Registered User
 
Join Date: Jul 2011
Country: Chile
First Name: N/a
Posts: 1
 
Default help me

I need a help please

xD
xD











R1#show ip route


Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - Periodic downloaded static route
Gateway of last resort is not set
C 172.17.0.0/16 is directly connected, Serial0/0
C 192.168.1.0/24 is directly connected, FastEthernet0/0
C 192.168.2.0/24 is directly connected, FastEthernet0/1
R 192.168.3.0/24 [120/1] vía 172.17.0.2, 00:00:17, Serial0/0
R 192.168.4.0/24 [120/1] vía 172.17.0.2, 00:00:17, Serial0/0

b. How Many Networks Routers R1 knows? (1Pt) ________

c. How many networks are directly connected to this Router? (1 Pet) _______

d. How many networks are learned from other routers? (1 Pet )_______

e. Given the codes that appear at the top of the results show ip route, what does "R"? (1 Pet)

__________________________________________________ ____________________________

f. On routes learned through RIP, what device 172.17.0.2 IP address belongs to? (1 Pet)
_________________________

g. On routes learned through RIP, what device referred Serial0 / 0 mean? (1 Pet)

__________________________________________________ _______________________
sykes17 is offline  
Sponsored Links
Advertisement
 
post #2 of 5 (permalink) Old 07-07-2011, 09:12 AM
Registered User
 
papawd's Avatar
 
Join Date: Jan 2011
Country: United States
First Name: warren
Posts: 2,494
 
Default

Welcome , this is a woodworking router forum,sorry I cannot help. But maybe someone can help Ya. Good luck

K.I.S.S.- Keep It Super Simple
For I Am Confussion at its Best
Don't fix it if it Ain't broken
Makin sawdust now in South Louisiana
papawd is offline  
post #3 of 5 (permalink) Old 07-07-2011, 11:58 AM
Registered User
 
MikeMa's Avatar
 
Join Date: Jul 2006
Country: United States
First Name: Mike
Posts: 1,022
 
Default

Here are the steps to correct your issue:

1. Install a 1/4" Spiral Upcut Bit in your plunge router
2. Zero out the depth of the bit by keeping router flat on your bench, and then plunging the bit so it just touches the bit.
3. Set the depth adjustment lever to the desired height.
4. Raise the bit back up
5. Plug the router in , and power it on
6. Using multiple passes make your cut, plunging the bit further and further into the work piece until the depth adjustment stops you
7. Power of the router and unplug
8. Go to your computer and log in to Internet if not already on
9. Open up your favorite browser to Google
10. Enter a search for IP Route and press the Google Search button
11. Pick any of the numerous sites that have the relevant information you are looking for, as you are currently on a woodworking website.
MikeMa is offline  
Sponsored Links
Advertisement
 
post #4 of 5 (permalink) Old 07-07-2011, 01:41 PM
Registered User
 
N'awlins77's Avatar
 
Join Date: Feb 2011
Country: United States
First Name: Lee
Posts: 1,622
 
Default

LOL, good one Mike!
N'awlins77 is offline  
post #5 of 5 (permalink) Old 07-07-2011, 02:33 PM
Registered User
 
Join Date: Jun 2011
Country: United States
First Name: Rob
Posts: 7
 
Default

:d
RobFV is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Router Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome