Router Forums

Router Forums (https://www.routerforums.com/forum.php)
-   Table-mounted Routing (https://www.routerforums.com/table-mounted-routing/)
-   -   Mounting Ryobi RE600 in router table (https://www.routerforums.com/table-mounted-routing/35969-mounting-ryobi-re600-router-table.html)

dvdkirtley 06-03-2012 08:48 PM

Mounting Ryobi RE600 in router table
 
Hello,

I have an old ryobi re600 which I'm mounting to a Rousseau Base Plate in my router table. I also have one of the Rousseau Centering Kits. Unfortunately my router doesn't have the 1/4" Bit Adapter which I need to use with the centering pin. I started a thread in the classifieds to see if anyone has a bit adapter, but I thought I'd ask here to see if anyone might have a "fix" for my situation.

Thanks,
David

williamm 06-04-2012 07:18 AM

Another collet may fit
 
I purchased a HF plunge router a few years ago. It came with only a 1/2 inch collet.
I purchased a Craftsman a few months ago which came with 1/2 and 1/4 inch.
I tried the 1/4 inch in the HF router and it fit so I used it a couple of times with no problems. I then ordered a new 1/4 inch from Sears parts to keep specifically for the HF which I have mounted in a table top.

If you have friends or know of others locally that have routers, you may want to check with them and see if they have a 1/4 inch collet that will fit your machine. The inside of my shaft is straight 1/2 inch so I only had to worry about the threads fitting.

Dmeadows 06-04-2012 10:52 AM

Many adapters are available. Here is one..

Amazon.com: 1/2" to 1/4" Router Bit Shank Adapter, Whiteside# 6400: Home Improvement


All times are GMT -5. The time now is 06:40 PM.

Powered by vBulletin® - Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.


vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.