Box joint jig for a craftsman table. - Router Forums
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 01-21-2014, 11:15 PM Thread Starter
Registered User
Join Date: Jan 2014
Country: United States
First Name: Joel
Posts: 3
Default Box joint jig for a craftsman table.

Hello, I have a Craftsman router table Model # 37596. Do they make a box joint jig to fit this or is there a good jig made to fit this i can make. Last three i made from my head didn't work.
RHINO965 is offline  
Sponsored Links
post #2 of 4 (permalink) Old 01-22-2014, 08:52 AM
Registered User
dutchman 46's Avatar
Join Date: May 2007
Country: United States
First Name: Howard
Posts: 2,825

I am not sure what You are looking for? Oak Park Used to handle a nice unit, However, I don't know if They still do! I would check, There address is on this forum. Also, You could go to the Incra original. I know that They can do many other things, such as dovetails, and different spacing's, There are others as well. The Incra can be seen on u-tube. Hope this helps

John 3:16

Please fill out your profile, It helps us to know you better
dutchman 46 is offline  
post #3 of 4 (permalink) Old 01-22-2014, 04:32 PM
Official Greeter
jw2170's Avatar
Join Date: Jan 2008
Country: Australia
First Name: James
Posts: 18,663
Send a message via Skype™ to jw2170

Hi Joel, there are many plans and examples of box joint jigs for router tables on the 'net.

Do you know why yours did not work?

Sydney, Australia

I don't mind if other members disagree with my comments.
I don't profess to know everything, and I may learn something new.

"Never attribute to malice that which is adequately explained by stupidity."

jw2170 is offline  
Sponsored Links
post #4 of 4 (permalink) Old 01-23-2014, 12:54 AM Thread Starter
Registered User
Join Date: Jan 2014
Country: United States
First Name: Joel
Posts: 3
Default Thanks guys

I have looked at a ton of the different jigs. I was looking for a commercially available set up that would fit my table. I am new to wood working and thought this might be the easiest way to go as most jig plans call for dual runners on your sled. The table i have only has one so there is where my problem came from.
RHINO965 is offline  

Quick Reply

Register Now

In order to be able to post messages on the Router Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Oak Park Box Joint Jig update Mike Jigs and Fixtures 100 09-30-2016 01:18 PM
router table box joint jeg b.kalister Table-mounted Routing 6 01-02-2011 07:31 AM
EagleAmerica Box joint jig 50% off Tommyt654 The Bargain Bin 4 09-18-2010 10:49 PM
Mounting an Oak Park Box Jig on Non Oak Park Table challagan Project Plans and How To 55 06-17-2009 10:18 PM
Bj's box joint jig steveo Jigs and Fixtures 1 02-12-2008 07:49 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome