Custom table for Makita plunge router - Page 2 - Router Forums
Reply
 
LinkBack Thread Tools Display Modes
post #11 of 22 (permalink) Old 03-30-2014, 12:01 PM Thread Starter
Registered User
 
Join Date: Mar 2014
Country: United States
First Name: Evan
Posts: 8
 
Default

Thanks, that puts my mind at rest. One other question/comment, I've ordered a 6X150 mm allen wrench head screw for the lift of the router through the router base from a fastener supplier. Has anyone else used this feature and if so, how well does it work. I saw a youtube video on it's use. Again, Makita support acted like they didn't even know what it was and do not sell the part.
pepelapugh is offline  
Sponsored Links
Advertisement
 
post #12 of 22 (permalink) Old 03-30-2014, 01:18 PM Thread Starter
Registered User
 
Join Date: Mar 2014
Country: United States
First Name: Evan
Posts: 8
 
Default

Thanks, I had one more question/comment for the forum. I've ordered the screw so I can use the lift through the plate of the router (Makita) - 6X150 mm. I saw this used on a youtube video. Has anyone taken advantage of this feature. BTW, Makita support didn't even know what it was nor do they sell the screw for it. It looks like it would make raising and lowers the router a snap!
pepelapugh is offline  
post #13 of 22 (permalink) Old 03-30-2014, 10:55 PM Thread Starter
Registered User
 
Join Date: Mar 2014
Country: United States
First Name: Evan
Posts: 8
 
Default Makita 2301 mounted in a table

Thanks for the responses. I have one addition question/response - The Makita's has a place in the base to accommodate a lift screw through and threaded into the side of the RP2301. I've ordered a 4X150 mm screw for it. I was wondering if anyone has used it and if so, how well does it work? I saw this used on a YouTube video where he used his drill to raise and lower the router. I had called and talked to Makita support and they didn't even know it existed let along sell the screw as an accessory.
pepelapugh is offline  
Sponsored Links
Advertisement
 
post #14 of 22 (permalink) Old 03-31-2014, 11:53 AM
Registered User
 
Join Date: Mar 2012
Country: United Kingdom
First Name: Kevin
Posts: 54
 
Default

I tried that by using the long cross headed machine screw that came with the router but soon gave up on it due to taking too long and it constantly filling up with sawdust.

I only use the fine adjuster knob for setting up and push the router up by hand for cutter changes.

Let us know how you get on with the Allen bolt when you get it.
straze is offline  
post #15 of 22 (permalink) Old 04-05-2014, 01:45 AM
Registered User
 
Join Date: Mar 2014
Country: United Kingdom
First Name: N/a
Posts: 13
 
Default

Quote:
Originally Posted by pepelapugh View Post
I've just purchase a new Makita RP2301 plunge router to replace a Freud 2000e that finally gave up the ghost. I'm looking for some ideas on how's the best way to mount this router in a custom table. I make a lot of custom molding and like the option to use the router above and below the table. Any suggestions would be greatly appreciated.
Hello Evan
I have just got a Makita and am facing the same problems. It would seem that the table system makes like Triton, Trend,Festool, which all have there own tables to match have the edge on the Makita. There seems to be a gap in the market for what we are trying to do ?. I am getting to the point of giving up on it.
tbone108 is offline  
post #16 of 22 (permalink) Old 04-09-2014, 09:54 PM Thread Starter
Registered User
 
Join Date: Mar 2014
Country: United States
First Name: Evan
Posts: 8
 
Default Makita 2301 mounted in a table

Quote:
Originally Posted by straze View Post
I've had my Makita RP2301 in a router table for the past few years and have had no problems with using the 4 fixing points in the router base to hold it onto the table insert plate. I have replaced the standard screws with longer stainless steel ones.
It's not a quick task to remove/replace the router, for hand use, from the table but a second router solved that problem for me
On my last post I indicated I had ordered the bolt that would be used to lift and lower the Makita 2301 through the router plate. When it arrived, it only had about an inch or so of actual threads. So I ordered a piece of threaded bar stock instead. When it arrived I went to HD and bought an allen-head wrench head 6x25 mm and welded it on to about 130 mm of the threaded bar stock. (apprently a 6X150 mm bolt threaded all the way does not exist) Rebuilt my router table from an old formica table top I had laying around, used parts from an old Craftsman table saw including the base and it all works like a charm. I replace the four 4x mm screw holding on the plate with four 4X25 mm screw to attach my router plate. I also used the on/off switch so I don't have to reach under the table and turn on the router via the handle switch. I use my drill to raise and lower the router with an allen-wrench bit.
pepelapugh is offline  
post #17 of 22 (permalink) Old 04-13-2014, 03:56 PM
Registered User
 
Join Date: Mar 2012
Country: United Kingdom
First Name: Kevin
Posts: 54
 
Default

Good to hear you have sorted things out.
Any chance of a few photo's?
straze is offline  
post #18 of 22 (permalink) Old 04-18-2014, 12:46 PM Thread Starter
Registered User
 
Join Date: Mar 2014
Country: United States
First Name: Evan
Posts: 8
 
Default

Quote:
Originally Posted by straze View Post
Good to hear you have sorted things out.
Any chance of a few photo's?
Here are a couple photos. As you can see my router plate is probably 90 degree from the norm, but I had changed my mind mid stream and used more of my existing Formica table and so my orientation of my fence worked better the way you see. (using my old parts from my Craftsman table saw). I also used my external switch so I could easily turn on/off the router.

I use my drill to raise and lower the router. Much easier than using the micro screw from under the table. You'll notice the screw had to be manufactured from threaded bar stock and an allen head screw purchased at HD. (6X150 mm was what I made it) I could not find anyone that had this bold/screw, but mine works great. For fine adjustments, I use my hand held allen wrench, then lock it in place with the locking tab on the router.

To change the router bit, I still find it easiest to lift the router out of the table.

It's not fancy, but it works great for me.
Attached Thumbnails
Click image for larger version

Name:	P1030862.jpg
Views:	2242
Size:	291.1 KB
ID:	70453  

Click image for larger version

Name:	P1030863.jpg
Views:	1200
Size:	327.9 KB
ID:	70454  

Click image for larger version

Name:	P1030864.jpg
Views:	722
Size:	154.6 KB
ID:	70455  

Click image for larger version

Name:	P1030861.jpg
Views:	1181
Size:	242.5 KB
ID:	70456  

pepelapugh is offline  
post #19 of 22 (permalink) Old 05-29-2014, 03:09 PM
Registered User
 
Join Date: May 2014
Country: Argentina
First Name: Martin
Posts: 2
 
Default

Thanks for the ideas! I just bought a rp2301 and was thinking how to do to use it on the table.
cmcorti is offline  
post #20 of 22 (permalink) Old 07-12-2014, 05:19 AM
Registered User
 
Join Date: May 2014
Country: Netherlands
First Name: N/a
Posts: 1
 
Default

I own a Makita rp1800fx router, which is basically a lightweight version of the 2300 but it's mounted the same way. I made a routerplate out of two layers of 6mm HPL. I've copied the position of the mounting screw from the plastic baseplate.
My router came with the long 6x150mm screw. Adjusting the height of the router is easy with the cordless drill and fine adjustments can be made with a normal screwdriver or the the fine adjustment on the router itself. Works like a charm.
Attached Thumbnails
Click image for larger version

Name:	IMG_20140618_140632.jpg
Views:	2742
Size:	678.0 KB
ID:	72209  

Click image for larger version

Name:	IMG_20140618_140613.jpg
Views:	784
Size:	719.8 KB
ID:	72210  

Click image for larger version

Name:	IMG_20140618_140640.jpg
Views:	473
Size:	640.2 KB
ID:	72211  

Click image for larger version

Name:	IMG_20140618_154029.jpg
Views:	532
Size:	770.3 KB
ID:	72212  

ArieXI is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Router Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Router Table Cross Road, What would you do, and how. amassey08873 Table-mounted Routing 9 07-03-2012 09:29 PM
First Benchtop Router Table, get a plate or go bare? silentblackhat Table-mounted Routing 38 05-30-2012 03:30 AM
Thanks for a great forum tmutchf New Member Introductions 9 03-11-2010 05:43 AM
Router table ideas Larwyn Table-mounted Routing 4 12-28-2009 02:47 AM
Router table or Plunge routing template tom Guide Bushings and Templates 15 04-14-2009 03:45 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome