Router Forums

Router Forums (https://www.routerforums.com/forum.php)
-   Table-mounted Routing (https://www.routerforums.com/table-mounted-routing/)
-   -   DUplicate Molding Profile (https://www.routerforums.com/table-mounted-routing/77977-duplicate-molding-profile.html)

JIMMIEM 10-11-2015 09:48 PM

DUplicate Molding Profile
 
4 Attachment(s)
I would like to replace rotting window trim pieces with Azek PVC. I would like to duplicate the molding profile. I have seen brick molding router bits but don't really want to buy a bit for such a small project. Any suggestions on how to do it with common bits?

Cherryville Chuck 10-11-2015 11:16 PM

Jim I did some picture frames a while back and Ifound that most of it could be done with ball nose bits. I also had built a horizontal router setup and it helped immensely since I could rout across the face at will while the back sat firmly on the table. You can take almost any profile and break it down into it's individual components.

Stick486 10-12-2015 12:30 AM

1 Attachment(s)
so why not buy brick molding made from Azek...


All times are GMT -5. The time now is 08:23 AM.

Powered by vBulletin® - Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.


vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.