Router Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. New Member Introductions
    Another a new member to the forum! I have a Porter Cable Model 890 router that I purchased in 2008 as part of the 893PK set. I have the fixed base mounted upside down in my router table. I'm right in the middle of my most recent project and the router has started to slip in the fixed base...
  2. General Routing
    I recently obtained a PC 890 router that had a mild vibration - nothing serious, but not what I expected. Turns out, the early 890 routers have a recall - they say that vibration can cause insulation abrasion that leads to a electrical shock potential. Here's what I think is going on - when I...
  3. General Routing
    Here's how I replaced the bearings on a Porter Cable 890 router. There's also a video on youtube, but I've added a few tricks for people who don't have an impact wrench nor press. 1. Remove top housing (two phillips screws) 2. Remove brushes (two Torx screws) 3. Remove two screws...
1-3 of 3 Results