Router Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-2 of 2 Results
  1. CNC Routing
    Hi all, hope you experienced CNCers can advise me. Surfacing a slab of maple, using the Amana 45525 bit. Running it at the recommended speed of 18000, and cutting at 100ips (the fastest my machine will go), with a depth of cut of 0.5mm, I just get continual burning. Tried slowing the rpm - no...
  2. New Member Introductions
    I am relatively new to routing and often have this problem. I use t/c tipped bits which were probably rather cheap so suspect this or that they are not sharp enough. Any ideas welcome: it's so tedious cleaning up! Howard
1-2 of 2 Results