Router Forums banner
bushing
1-5 of 5 Results
  1. Guide Bushings and Templates
    Hello and please forgive my apparent ignorance on what I am doing. First post here to try and resolve why I keep destroying guide bushings (2). First, I went with my Festool OF 1010 and chucked up a 1/4" CMT 191.008.11 Solid Carbide Upcut Spiral Bit and proceeded to test cut. I quickly ate...
  2. Guide Bushings and Templates
    Hi forum, it's my first attempt to use guide bushings. I am not able to center my Woodcraft Guide Bushings (brass) in my PC 693 or Craftsman 320.27683. Both routers have their original base plates and are designed for bushings. I have followed some suggestions from youtube about centering the...
  3. Guide Bushings and Templates
    So I purchased an inexpensive Woodriver ($19) set and they are off center. I am wondering if this set maybe was just not made for my PC 690.
  4. New Member Introductions
    I've just bought and used a Trend Guide Bush Collar (the one that goes on a 20mm guide bush and turns it into a 40mm guide bush). Trouble is they are mighty stiff to remove…does anyone have a clever way of removing them without damaging the collar or the bush? Many thanks for any help James
  5. Guide Bushings and Templates
    Help! I just bought a Porter Cable 890 for a project I'm building and the plan calls for a bushing. I've searched the web trying to find a good set but I'm not even sure what will work with the router. The sub-base has a 2 1/2 inch opening and every thing I read talks about 1 1/2, 1 /14 and 1...
1-5 of 5 Results
Top