Router Forums banner

chamfer

  1. General Routing
    I am using clear vertical grain fir and will be routing a "lambs tongue" or 45 degree stopped chamfer on the corners. Since CVG fir has a propensity to splinter does anyone have any suggestions on how to avoid or minimize this problem? Any advice will be greatly appreciated.
  2. Jigs and Fixtures
    I need to put some 1plus inch, 45deg chamfers on some (full) 1x3in strips. Seeing as how I don’t have a large bit, I thought I’d try to use a straight bit and an auxiliary 45deg fence and some light passes. I made a triangular fence that would face the table fence and allow the work to be...
Top