Router Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. CNC Routing
    Recently my workshop's Shaper spindle has stopped rotating. I've narrowed it down to the spindle having been essentially shoved back into the body of the motor, which means when fully tightened down, the collet nut rubs against the housing and prevents it from moving. It's likely related to...
  2. General Routing
    I made my collet nut with a slide puller. I used the hook attachment. I used my hand grinder with a very thin cutting blade to cut the front part, then I used my rotary tool to grind the hole to fit my collet. The metal is too hard to use a drill bit. Whit the photos you will understand. The...
  3. General Routing
    I have a Craftsman router model 315.17480 and i'm looking for a substitute part for collet nut 1-606489-04. Inside tread is UNF 5/8"-18 the collet hole is about 3/8". The outside diameter was I think 7/8".
  4. New Member Introductions
    Hi, my name is Wesley and I'm from Mississippi. Looks like you guys have a nice board here. Thanks for letting me in. I have a pretty basic question, hence one of the reasons I stumbled upon you guys. I have three routers, but this question is regarding the Craftsman 9.5 amp 1 3/4HP Model No...
  5. General Routing
    My name is Richard and I have just baught some Freud routers. My ft300 router on the Freud table has only got the 1/2" collet with it, one Freud 1700 has no collets or collet nut and the other 1700 has both a 1/2" and a 1/4" collet. Can I get new collets to replace the ones I don't have? How...
  6. Router Forums Classifieds
    Collet Nut Freud FT2000. Want to buy or find the best place to buy it. Thanks
  7. General Routing
    Hi I am new to the forum but I thought someone might know where to get a collet and rotary ring and a collet nut for an old Craftsman super router model 315.17390 any help is appreciated. thanks
1-7 of 7 Results
Top