Router Forums banner
crosscut sled
1-5 of 5 Results
  1. Tools and Woodworking
    I have a problem with alignment on my tablesaw crosscut sled. When I cut on the right hand side of the blade, I get a satisfactorily square cut. When I line up to make the cut on the left side of the blade it is not square. I've checked everything I can think of for square. The fence is...
  2. Table-mounted Routing
    Hi, I am working on a home project which requires making crosscut dado and rabbet cuts. I made a prototype using my tablesaw using Dado blades. My wife approved. I was thinking of possibly using my new Bosch RA1184 table to make the final cuts or would I better off sticking with the tablesaw? I...
  3. Tools and Woodworking
    For those of you that are following the accessories for the Super Sled, there's a new video available that shows how to build the mitering system. Watch the Video: Super Sled - Crosscut and Miter Sled Here's a few pictures of the new setup:
  4. Tools and Woodworking
    I finished the latest accessory for the Super Sled - the Tenon Jig. It's pretty darn easy to build. Given the cost of commercial tenon jigs, you could easily make this one with the scrap plywood you have laying around. To watch the video , click here: Super Sled - Crosscut and Miter Sled The...
  5. Tools and Woodworking
    Watch the Video: http://www.eaglelakewoodworking.com/post/Super-Sled-Crosscut-and-Miter-Sled.aspx Download a measured drawing: http://www.eaglelakewoodworking.com/post/Super-Sled-Crosscut-and-Miter-Sled.aspx Project Description: I just completed a two part video series on how I made my new...
1-5 of 5 Results
Top