Router Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. CNC Routing
    The shelves and bracket supports, as well as the joints between them, were all CNC cut. I needed some place to display a growing collection of foxes, and this odd corner next to my front door was an otherwise unused space. Light switches and a floor vent had to be worked around. The vertical...
  2. Project Plans and How To
    Would anyone know the best place to get plans for a multi-shelf, illuminated display case. I intend to build it about 72" h. x 24" w. x 15" d. Any help would be appreciated.
  3. Show N' Tell
    This is a military retirement shadowbox with attached flag holder and a matching flag holder I made for a retiring US Navy Sailor. The wood is more of the Indian dontknow I use in most of my projects. The shadowbox and holder stand 42 inches tall. The shadowbox itself is 22 by 28 inches. The...
  4. Show N' Tell
    This is my latest submarine coin holder. I added bow planes to this one for a little more effect. I used Dark Mahogany stain with a gel polyurethane coating. The last picture is with one of my black painted submarines next to the stained one for a contrast.
  5. Show N' Tell
    Got a commission to make a display for a Navy Dive Knife. Wood is Indian Dontknow (it's from Indian and I don't know what species it is.) The base is bookmatch cut glued with 5 min epoxy, routed with an ogee bit, sanded to 320 grit using a 48" belt sander and a sanding mop, then 1 coat of 2#...
1-5 of 5 Results