Router Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 10 Results
  1. Table-mounted Routing
    For quite a while now I've just used a simple MDF fence clamped to my router table and cut out the space on the vertical piece to fit the router bit I was using. Dust collection was usually a shop vac hose duct taped to the back of the fence. Now that I've moved into my new shop, I'd like to...
  2. Jigs and Fixtures
    The fence on my Craftsman (aluminum top) table is very difficult to adjust fore and aft. It moves connected to “slots” in the table, very imprecise. It is a good fence otherwise. I suppose the problem is not one that I alone have. I spent a lot of time looking over the internet for some add-on...
  3. Tools and Woodworking
    Hi. I have a unisaw from “97” with a biesemeyer fence. I am finding that here is no simple way to attach things to the fence. I am trring to rip thin pieces for inlay ( 1/4 thick X 1/8 wide) and need to put a feather board on the fence, but find the clamp is in my way.. I have been looking at...
  4. Table-mounted Routing
    Dumb question, sorry, just getting into routers and building my first table. Why is the slot always in the table top? Couldn't you hook up a sled to a track on the fence?
  5. Jigs and Fixtures
    Does anyone know if the Incra fence (or other similar technology in fences) has a problem where the fence has a tendency to flex when you are pushing against it? By looking at this, I am wanting to put blocks at the ends.
  6. New Member Introductions
    Hi. New to the forum, and have been working on upgrading my router fence. I plan on making versus buying on, but I want to know if anybody knows how strong and sturdy the Kreg heavy duty trak is.
  7. New Member Introductions
    Hello Everyone, Just getting my name and status out there to everybody. I am new to routing, but not new to wood working. I am self employed doing property maintenance and services in Maine. I am pretty handy at most things a love problem solving. I acquired a Hitachi M12VC 2-1/4-Horsepower...
  8. Jigs and Fixtures
    I am looking at either the Incra Original jig system or the Ultra Lite jig system. There isn't much delta in the cost but still some -- about $40. At first look the original seems to be a good value but the Ultra appears more substantial being aluminum. I mainly want it for a table fence but...
  9. Table-mounted Routing
    Hello! Glad to have found this forum. I recently started getting back into woodworking and wood carving. I recently picked up a Freud 1702 on special at Lowes....My immediate need is to find or make a router table preferably using Freuds micro-adjustable fence as I will also use it for...
1-9 of 10 Results
Top