Router Forums banner
harbor freight
1-7 of 7 Results
  1. Table-mounted Routing
    (Short version... looking for an aluminum (or other material) insert plate for my 1617evspk. Insert measures 14½ inches long, 11½ inches wide, and room for plate is ⅜ inches tall.) Longer version: I have a GMC Router Table (it was also made for many other companies... most known in the US is...
  2. Workshop Showroom
    Just started working on my Harbor Freight DC Super Dust Deputy upgrade.
  3. Tools and Woodworking
    So I have an old 12-speed drill press and am missing 2 parts. The Arbor and Chuck. I have been researching this machine and have found very little on it. Does anyone know where I could find a parts manual or where to buy these parts? Would the parts have to be Chicago Machine Tools or would...
  4. Starting Off
    Hi Folks, I am drowning in dust, especially the router and table saw. The dust sent 2 shop vacs to the repair shop. So I purchased a Harbor Freight 2 HP collector. I then ran some searches for setting the collection duct-work, and connecting to the dust creators. I came up with a lot of clever...
  5. New Member Introductions
    This is my first post. I have a Harbor Freight 6 in joiner. It works fine most of the time but every so often I have to reset the tables to get a flat cut. I leveled the blades with the rear table. But I have to watch I don't get a little snipe on the rear of the board. It would be nice to...
  6. Harbor Freight / Central Machinery Manuals
    This is the manual for the Central Machinery 8" wet grinder that was sold by Harbor Freight. The Northern Industrial Tools T2000S "Wet Sharpener" is identical. The Grizzly T10097 is also the same. Mike
  7. Grizzly Manuals
    Grizzly 14" Bandsaw. Mike
1-7 of 7 Results
Top