Router Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. New Member Introductions
    I am a retired Chemist with an associate degree in electronics and an interest in machining. I have an extensive background with computers but I am having difficulty getting Linux into a Windows system. I want to purchase a small router on eBay and machine some holes in an electronic...
  2. New Member Introductions
    Hi. I just started to make 9" letters out of mdf (moisture resistent) board. I am using a templet and a 3hp inverted router to cut 1/2" mdf (MR) BOARD. I am dulling bits in a few letters. I have 3 settings to cut in 3 passes, but I am affraid of getting cut lines on edges if I use the settings...
  3. General Routing
    i want to cut out 2 holes for draw fronts to be inserted flush with the face of the box, that i am making. The draw fronts will be rebated so i need to cut out the holes in the front face of my box rebate it but i cannot figuar out how to cut this out. my wood is 1/2" thick by4 3/4"x2'long I...
1-3 of 3 Results