Router Forums banner

new member

  1. New Member Introductions
    Hello, I'm Strider_62, I am very interested in woodworking. I don't have a lot of name brand tools, but I am adding as I go. I am looking forward to learning from you all. I have not had much experince woodworking, but I am more than willing to learn all that I...
  2. New Member Introductions
    I am new the this forum and to the world of CNC routers. I have not purchased a router as of yet, just started looking. I have worked with woodworking tools most of my live (minus the 60's) and have been making rocking horses for under-privileged kids and now want to make more faster. I need...
  3. New Member Introductions
    i am a new member to this forum. I have built my own cnc router about a year ago.i had a lot of fun and learned quite a bit about cnc.So far i have built a wooden clock and some lithographs. i use mach 3 for code.I also have CamBam,and a couple of other programs. Hope to contribute to this forum...
  4. New Member Introductions
    Greetings fellow woodworkers. I am a New member from Western Massachusetts and live in Greenfield Mass, right on the Connecticut River. I make little boxes and cribbage boards. Using two CNC routers (CarveWright) I am able to carve 3D images into the center of the cribbage boards. I'll post...
  5. New Member Introductions
    Hi I'm a new member and wanted to take a little time to tell you about myself. I have been in the metal machining world for over 30 years. I just recently bought a CNC Router for home hobbing. The reason I starting looking at forums is because I was having a problem with the cutting the outside...
  6. New Member Introductions
    Hi everyone. I'm Fred from Springfield, VA. I'm recently retired from the Army, and have two sons. One is 14, the other is 16, and they're both great baseball players. I intend to use woodworking to supplement my income. Virginia horse country has some incredible reclaimed wood available if you...
  7. New Member Introductions
    Hello to the community, my name is Jaime and I live in Guatemala city in central america. I would like to know about routers, because I will receive a láser machine, but the machine just make cuts in two dimentions and I would like to make a few finish on them, then I will buy a router Bosch to...
  8. New Member Introductions
    I am starting to set up a wood shop for retirement. I am interested in what wood working tools are the most dependable, accurate and cost effective. I am making a dining room table now and would like to use mortice and tendon joints in a few places. Does any one have experience with a jig...
  9. New Member Introductions
    Hi all, I am a woodworker with some experience but always interested in learning more from any source available. I have a dedicated 23' x 23' woodworking shop (built just last summer) with a pretty nice variety of tools, accessories and jigs. I do cabinetry, lathe work, and I have a 200 year...
  10. New Member Introductions
    Hello, I am Vernon (Poo to my grandkids) I live and wood fun in Elizabethtown, Ky where I make wooden knives, boxes and turn bowls. I look forward to being a member and to be able to learn from all of you. Vernon
  11. New Member Introductions
    This is the warmest month on record in CO and I'm lovin' it. Car is outside on the driveway and in the garage, the "tools" are spread out for easy access. I am working on getting the TS and sled square and think I have finalized both today. Since the tools and car must share the same garage...
  12. New Member Introductions
    I am new to the forum and found it looking for info on routing for pex tubing. I have been in the woodworking business for about 40 years and still love to learn new things and take on new challenges!
  13. New Member Introductions
    Hello everybody, I am new to your group. Been woodworking most of my life. Enjoy all things wood. Phil
  14. New Member Introductions
    Looking forward to your help and assistance....I'm going to need it!!!
  15. New Member Introductions
    Just joined, have had routers for a number of years and about to build a table. I have a de Walt 621, Hitachi TR12, a small Makita and a small B&D which sits on an overhead arrangement. Look forward to sharing. Regards Robin
  16. New Member Introductions
    My name is Bob. I live on the other side of the big pond in Australia. Now that I am retired I have more time now to enjoy woodworking and an looking forward to improving my router skills. On a 1 to 10 scale I am at 5.5 Regards Bob
  17. New Member Introductions
    I am a 72 young carpenter's apprentice, and have been a wood butcher and maker of premium sawdust for most of my working life. I was introduced to woodworking by my father who put my first tool in my hands in the 5th grade. It was a No. 2 idiot stick which I used to help dig the basement for...
  18. New Member Introductions
    Hello Everyone. I just bought my first router table (Kreg) and I'm in the process of setting it up. Google brought me to this forum which I can't praise enough. I know for certain I'll be coming here almost daily as I learn more & more about routing. I'm currently deciding what router to buy...
  19. New Member Introductions
    Hello, I am a new member and would like to introduce my company to all members. My company is Angelo's Electric Ltd. We are located in Toronto with another branch in Barrie Ontario. We sell power tools, fasteners, blades, adhesives etc to contractors. We also repair and sharpen all blades on...
  20. New Member Introductions
    I'm new to the forums, and new to woodworking. Looking for information and answers to a lot of questions I have, and looking for ways to improve the projects I have in mind and better utilize my router and tools.
Top