Router Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Table-mounted Routing
    I have made a router table (very proud!) and mounted my router, done the first few jobs, but now need a proper fence that I can use for the table length 1.4 m (55.5 inches). Can this table fence be purchased, or a smaller manufactured fence adapted, or do I have to make one myself? I would...
  2. Table-mounted Routing
    I have recently acquired a Benchdog router fence and was wondering if anybody has any tips for attaching a tall fence for upright work? The MDF sub-fence on the benchdog is vey low and sticks out past the aluminium frame so a tall fence would tend to tilt and would be very unstable, clamps would...
  3. Table-mounted Routing
    What's happening? My workpieces seems to sometimes catch the edge of the fence on the outfeed side when running along from the infeed (right) side on the router table. It's decent Rockler fence, and since it's all one piece, I assume the two sides must be co-linear.
1-3 of 3 Results