Router Forums banner

small

  1. Router Bits - Types and Usage
    I'm trying to route a small slot 1/16" wide, 3/4" long, and at least 3/8" deep. I've found 1/16" bits, but the cutters are not long enough to cut 3/8" deep. Anyone have a source for a longer 1/16" bit, or have a different suggestion of how I could make this type of slot in an open face of the...
  2. CNC Routing
    Hello, I have a MT Series 36" by 36" router. I'm cutting small radi dimensioned at 1/32" out of .017" thick ceramic material. I'm cutting with a 1/16" carbide TiCN coated cutter. RPM=30k feed=5ipm. I'm using Enroute 4 to create the g code i have to make internal and external radi. The internal...
Top