Router Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 23 Results
  1. Ryobi Manuals
    Ryobi RTS31 Table Saw Owner Manual (English Version)
  2. New Member Introductions
    Thanks for letting me join the forum. I consider myself more handy than an expert (or even amateur) woodworker. Over the years, I've dabbled with making pens, etc. However, I haven't invested in the tools to get more serious. So, I just bought a Bosch 1617EVSPK router. I am working on a router...
  3. Jigs and Fixtures
    Getting my Craftsman Table Saw Rip fence parallel to the blade has been a constant aggravation and always with mixed success. I have seriously contemplated replacing the Rip fence many times, but every time, I dismiss the idea because I’d rather apply the $$$ towards a new saw. So until I can...
  4. Tools and Woodworking
    Ok, I am back after a few weeks with yet another plea for help from my friends at Router Forum. You see, I have been busy these past few weeks and one of my projects is making a cross cut sled for my table saw. However, being Mr. Ridiculous and Mr. Perfection at the same time I have a dilemma...
  5. Tools and Woodworking
    I recently inherited an older Craftsman table saw from my late father-in-law. The table is in good shape, the blade spindle is good, and the lift/tilt mechanism is also good. He had a newer Craftsman power-tool motor with it, but it was not attached and working. The saw has its original 2"...
  6. Starting Off
    Hi Folks, I am drowning in dust, especially the router and table saw. The dust sent 2 shop vacs to the repair shop. So I purchased a Harbor Freight 2 HP collector. I then ran some searches for setting the collection duct-work, and connecting to the dust creators. I came up with a lot of clever...
  7. Tools and Woodworking
    Has anyone seen the wood whisperer video on the VerySuperCoolTools extruded table saw fence. It's $250 complete and it looks real good to me. The VerySuperCoolTools site has details video to make your own so I plan on using my old welding skills to make my own. The 1 1/2" x 3" extrusion...
  8. New Member Introductions
    Greetings and Merry Christmas to all. My Name is Scot. I'm a casual woodworker with the usual tools. I discovered this site when I was designing a router table to add to my Chraftsman table saw, I plan on using the table saw fence as the router fence too. I enjoy the information found on this forum.
  9. Table-mounted Routing
    I bought a Ryobi tablesaw this summer. It has a sliding panel that is cut out for a router or something- manual doesn't help. I could drill and countersink but don't want to endanger the integrity of the casting. I'm thinking about making a panel from an old piece of countertop, cutting it...
  10. Tools and Woodworking
    Ridgid 4510 or 4512? I'm in the market for a solid table saw and I'm looking at both the 4510 and 4510 saws from Ridgid. Has anyone compared both the 4510 and 4512 directly? Aside from the obvious differences, I was wondering if anyone has had an opportunity to try both saws enough to develop...
  11. Tools and Woodworking
    Hello all, What do you use to protect your cast iron equipment and tools. Reason I ask, Is I live in NJ, 25min from Jersey Shore (Not sure if that matters) But I'm having a hard time protecting my Table Saw from Surface Rust over a an extended amount of time. Say a week. I just finished my...
  12. New Member Introductions
    hi all i lookforward to asking sensible questions till then i apologise ! just setting up my workshop at the moment im currently after a decent table saw got about £250 to spend any recomendations or should i make one if so any tips or suggestions cheers phil
  13. Tools and Woodworking
    To start off, on a weekly basis I have been visiting my recycling center where I live. I always find useful junk for woodworking and my metal projects (just bought a Lincoln HD140 welder on Craigslist). I had noticed months ago in the corner of the property there was what seemed to be the...
  14. General Routing
    Do any of you find a Dado blade for your table saw necessary, or do you, like I use a router for all you dados? I've had a number of people recommend lately that I get a dado blade for my saw, but I've managed for all these years to do all my dados with a router. My saw is awesome, but I don't...
  15. Table-mounted Routing
    This is my table saw & router setup.
  16. Tools and Woodworking
    HI, I'm Ketan. I'm shortly to be setting up my workshop from scratch and hope to use this site to find information on tool reviews / timber suppliers etc. At the moment, i'm leaning towards getting the Axminster TSCE-12R 305mm Table Saw so would be glad to hear anyone's opinion on it and in...
  17. Shop Safety
    Excellent video and funny story by the Colbert Report on the Saw Stop last night...system won't allow me to post the URL so search for Colbert Nation and look for story on table saw safety. Now if I only had the money for one...:cool: Andy
  18. Tools and Woodworking
    I am trying to locate a Ryobi BT3100 Table Saw for a home workshop in Sydney, Australia. Any Ideas where I may source this machine?:help:
  19. Ryobi Manuals
    Parts manual for the Ryobi BT3100
1-19 of 23 Results
Top