Router Forums banner

trim

  1. Jigs and Fixtures
    I need to purchase 6 aluminum pieces each approx. 1/2" x 6" wide x 48" long and both edges of these pieces must be perfectly straight. The choice I have is either aluminum flat bar which is an extrusion and the edges are not always perfectly straight or aluminum plate which is cut to size with...
  2. Table-mounted Routing
    Hi folks. Glad to be among experts. My first post: I've glued 1/4 inch strips of 7/8 wide oak to the front and back edges of a 3/4 inch oak plywood panel that's about 20" wide including the strips. I want to flush trim these on the router table (Kreg table and fence). I thought this would...
  3. General Routing
    I just bought a plunge trim router and I am new to this tool. looking for some links with vidieo of set up and use. the manual says that you must use the guards. I am attempting to make a heart shape jewelry box and would like to round over the out side and inside edges of the maple frame top...
  4. New Member Introductions
    I am in the process of building a ladder style bookcase and am working on the shelves currently. Unfortunately when I stapled/glued the 1/4" birch plywood on the bottom of the 1" x 3" pieces for the sides the clamps pulled the plywood proud of the back by about 1/16". I was going to use a...
Top