Router Forums banner

10" sliding compound mitre saw

2496 Views 9 Replies 9 Participants Last post by  radios
I have an older model saw ans have lost the manual. Need to download a replacement manual as I have problems
1 - 10 of 10 Posts
welcome to the forum N/A...
what make and model of saw do you have and what's the problem....
  • Like
Reactions: 2
@ Leapster 83, there are folks in this Forum who will answer your questions if you just add more information,(as per Stick486 said above).So fill out your profile & welcome to the Forum. James jj777746
@ Leapster 83, there are folks in this Forum who will answer your questions if you just add more information,(as per Stick486 said above).So fill out your profile & welcome to the Forum. James jj777746
I found the question a little vague . Sticks brilliant, not clairvoyant
  • Like
Reactions: 3
I found the question a little vague . Sticks brilliant, not clairvoyant

Where...?

...don't know about the other part...
  • Like
Reactions: 2
...don't know about the other part...
neither do I...
Hey, Leapster; welcome!
"Need to download a replacement manual as I have problems"
The saw part we can probably help with... ;)
  • Like
Reactions: 1
@ Leapster 83

Hi, most saws have a label somewhere on them with model number and serial number. The brand is usually emblazened on the saw as well. That's what we are asking for. BTW, we have a whole section of user manyals for a rediculous number of tools, all in pdf form so you can download and print one. You could also search for a user manual with that information. The serial number is only needed if there is a change in the model over time--some internal part or electronics upgrade.
  • Like
Reactions: 2
take a look here to get the manual or parts. https://www.harborfreight.com/customer-service-product-support.html central machinery is located in China. WWW.searspartsdirect.com is also a good source for info on anything made in China also, no matter what brand..
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top